Table of Contents
Advertisement
Setup LastPass
（2）
Used to set the parameters of "LastPass" redirection, the default is
fine.
Select Serial Port
（3）
Used to set the port and baud rate for the software to obtain data, the
default is fine.
Guide Direction
（4）
Used to set the direction of the guide arrow in the JY100 interface.
View type
（5）
Two display modes of the JY100 interface: text and picture.
Address:Room311, F3 Shahe Xili, No2-2 North of Xili , Xili Town, Nanshan
District, Shenzhen, China,518055.
Eml: support@smajayu.com & tech@smajayu.com
SMAJAYU TECHNOLOGY
LIMITED
Figure 10 Equipment Width Setting
Advertisement
Table of Contents
