Encore POLYCOM 650 Quick User Manual

PLACING A CALL

Using the Handset: Pick up the handset, and then dial the number. Or, dial the number first, and
then pick up the handset.
Using the Speakerphone: Press the Speaker key, then dial the number. Or press the Line key
and dial the number. (there may be up to a 4 second delay before the phone starts the call)

ANSWERING A CALL

Handset: Pick up the handset.
Speakerphone: Press Speaker or Line key, or the Answer soft key.
**Incoming calls may be denied by pressing the Reject soft key during ringing.** The call will go to
Voice Mail

ENDING A CALL

Depending on the call mode Press: Speaker or hang up the handset. Or, Press the EndCall soft key

REDIAL

Press the Redial key to dial the most recently dialed number, or use *69

CALL HOLD AND RESUME

ring a call press the Hold button. To resume the call, press the Resume soft key, the
During a call press the Hold button. To resume the call, press the Resume soft key, the
Line key, or the Hold button.
Line key, or the Hold button

CALL TRANSFER

During a call press the Trnsfr soft key (the active call is placed on hold).
** Two transfer types are available: Normal and Blind **
Normal: Dial the extension of the party to which you want to transfer the call, press Dial or #.
After speaking with the second party press the Trnsfr soft key to complete the transfer.
Blind: Place a call to the party to which you want to transfer the call, press Dial or #, then hang
up
VoiceMail: press the Trnsfr key, press Blind, then dial *99 and the number you wish to transfer
the call to, followed by the # key.

LOCAL CONFERENCE CALLS

To create a three way local conference call:
1. Connect to the first party.
2. Press the Conference button or the Confrnc soft key to create a new call (the active call is
placed on hold).
3. Dial the number that you would like to conference in and press Send to place a call to the second
party.
4. When the second party answers press the Confrnc soft key again to join all parties in the
conference.
Terminate a conference call by pressing End Call soft key
Conference Behavior:
• Placing the conference call on hold will place the other conference parties on hold. • Placing the conference call on hold will place the other conference parties on hold.
POLYCOM 650 Quick User Guide
Page 1