Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Benthin MPC 100
- Page 1 MPC 100 Manual Pleated Fabric Cutter Working instruction Benthin Technology GmbH Osterstader Straße 16 D-27572 Bremerhaven Telefon +49 471 79 84 190 Translation +49 471 79 84 233 Read working instructions carefully before any usage! www.benthin.com...
-
Page 2: Table Of Contents
Manual Pleated Fabric Cutter MPC 100 Table of contents General About the instruction manual ..........3 Manufacturer / order of spare parts / after-sales-service ....3 Product description ..............4 Appropriate use ..............5 Inappropriate use ..............5 Delivery ................6 Technical specification ............7 Explanation of symbols ............7 Limitation of liability ..............7... -
Page 4: General
Manual Pleated Fabric Cutter MPC 100 General About the instruction manual This instruction manual provides important information on using the machine/equipment. Safe operation can only be ensured by following all the safety instructions and directions contained in the manual. The local accident prevention regulations and generel safety regulations for the machine‘s/equipment‘s area of use must also be complied with. -
Page 5: Product Description
Manual Pleated Fabric Cutter MPC 100 General Product description • Manual cutting of curtain-width pleated fabrics and honeycomb fabrics. • Max. cuttable fold depth: 25 mm. • Max. cuttable packet height: 115 mm. • Measuring stop up to 2400 mm. • Optimal cutting lever efficiency makes cutting easy. • Cutting tool: cost-effective trapezoid blade, quick to change. • Cutting can be done according to profile track measurement (correction measurements can be set). • Solid guide carriages for fabric clamp and cutting unit. • Optional: Fabric adjustemend rail part no. 98000257 MPC 100 Set part no. 98000272 • Warranty: 12 months... -
Page 6: Appropriate Use
Manual Pleated Fabric Cutter MPC 100 General Appropriate use A trapezoid blade, operated by leverage, is used to cut pleated and honeycomb fabrics to: - Curtain-width - Profile track measurements, with correction measurements can be set The following limits must be complied with: - max. fold depth: 25 mm - max. -
Page 7: Delivery
Manual Pleated Fabric Cutter MPC 100 General Delivery Item Pcs Part no. Illustration Pleated Blind Cutter MPC 100 98000245 Table (optional) 98000258 Trapezoid blade 98000248 Hexagon wrensch key size 3 13004181 Hexagon socket head cap screw DIN 912 M4 x 12... -
Page 8: Technical Specification
Manual Pleated Fabric Cutter MPC 100 General Technical specification • Machine dimensions: 274 mm x 2942 mm x 537 mm (H x W x D) • Weight: 15 kg Explanation of symbols Warnings in the operating manual are indicated by symbols. The instructions are introduced by signal words, which express the scope of the risk. Observe the instructions by all means and act with prudence in order to prevent accidents, personal and property damages. -
Page 9: Safety
Manual Pleated Fabric Cutter MPC 100 Safety Introduction This section provides an overview of all the important safety aspects for ensuring optimum protection of personnel and safe, trouble-free operation. Failure to comply with the directions and safety instructions contained in this manual can give rise to serious risks. -
Page 10: Operating Personnel
Manual Pleated Fabric Cutter MPC 100 Safety Operating personnel CAUTION! Injury due to inadequate qualifications! Inappropiate operation can result in serious personal injury and property damage. Therefore: • Particular activities must only be carried out by the persons specified in the relevant sections of this manual. • In case of doubt, specialists must be called in. The instruction manual specifies the following qualifications for various areas of activity: • Trained persons have received instruction from the operator in the tasks assigned to them and the possible risks of inappropriate behaviour. -
Page 11: Compliance With Environmental Protection Regulations
Manual Pleated Fabric Cutter MPC 100 Safety 2.10 Compliance with environmental legislation The statutory requirements regarding waste avoidance and proper recycling/disposal must be complied with for all work on and using the machine/equipment. In the case of installation, repair and maintenance work in particular substances... -
Page 12: Transport / Package / Storage
Manual Pleated Fabric Cutter MPC 100 Transport / Package / Storage Safety instructions for transport Attention! Damages due to improper transport! The property can be substantially damaged due to improper transport. Therefore: • Be careful and observe the instructions on the packaging when unloading the packets at delivery as well as during internal transport. -
Page 13: Mounting
Manual Pleated Fabric Cutter MPC 100 Mounting Safety instructions Note! Installation and commissioning must be carried out by the manufacturer‘s personnel or persons authorised by the manufacturer. CAUTION! Risks due to faulty installation and commissioning! Installation and commissioning require trained specialist staff with sufficient experience. -
Page 14: Installation Plan For Cutter
Manual Pleated Fabric Cutter MPC 100 Mounting Installation plan for cutter (measures in mm) 2370 mm 270 mm 4.2.1 Space requirements The recommended distance is: - left side: min. 2370 mm - right side : min. 270 mm - rearward: min. -
Page 15: Installation Plan For Pleated Blind Cutter Table
Manual Pleated Fabric Cutter MPC 100 Mounting Installation plan for pleated blind cutter table (measures in mm) 5458 4.3.1 Mounting dimensions for fitting pleated blind cutter (measures in mm) 7 x 300 2 x 300 4.3.2 Mounting dimensions Mounting cut-out in table: 421 mm x 271 mm... -
Page 16: Rigging
Manual Pleated Fabric Cutter MPC 100 Rigging Safety instructions Note! Only use spare parts made by Benthin. The ruler for the fabric width and scale for the clearance dimension are mounted on the respective stopper rail. Attention! If a fabric aligning rail (optional) is used, the stop plate on the stopper... -
Page 17: Mounting Stopper Rail
Manual Pleated Fabric Cutter MPC 100 Rigging Mounting stopper rail 1. Bolt stopper rail to baseplate and table worktop with fixings provided 2. Press straight pins down © 2012 Benthin | Misprints, errors and changes reserved | 31-05-2012 ®... -
Page 18: Mounting Fabric Aligning Rail (Option)
Manual Pleated Fabric Cutter MPC 100 Rigging Mounting fabric aligning rail (option) 1. Remove cap 2. Secure bracket with self-tapping thread screw 3. Slide fabric aligning rail under bracket 4. Screw locking bolt into bracket as far as stop © 2012 Benthin | Misprints, errors and changes reserved | 31-05-2012 ®... - Page 19 Manual Pleated Fabric Cutter MPC 100 Rigging Mounting fabric aligning rail (option) 5. Loosen locking bolt one turn 6. Tighten nut 7. Replace stop plate on stopper control © 2012 Benthin | Misprints, errors and changes reserved | 31-05-2012 ®...
-
Page 20: Layout / Function
Manual Pleated Fabric Cutter MPC 100 Layout / Function Layout Stopper rail Stopper control Stop plate Handhold for clamping bar Fabric aligning rail (option) Rail stop Clamping bar Cutting lever Function • Manual cutting of covering width for pleated blind and honeycomb fabrics. • Max. fold depth: 25 mm • Max. stack height: 115 mm • Measuring stop max. 2400 mm • Easy cutting thanks to optimum efficiency of cutting lever. -
Page 21: Operating
Manual Pleated Fabric Cutter MPC 100 Operating Safety instructions Attention! When changing the trapezoid blade, secure the cutting lever against accidental operation. © 2012 Benthin | Misprints, errors and changes reserved | 31-05-2012 ®... -
Page 22: Cutting Fabric
Manual Pleated Fabric Cutter MPC 100 Operating Cutting fabric 1. Set stopper control to fabric width 2. Lock stopper control with lever 3. Insert fabric and slide up against stop plate 4. Clamp with clamping plate 5. Fix fabric with fabric aligning rail (option) 6. -
Page 23: Cutting Fabric To Profile Rail Size
Manual Pleated Fabric Cutter MPC 100 Operating Cutting fabric to profile rail size 1. Set deduction measurement 2. Clamp profile rail between stopper control and rail stop 3. Lock stopper control with lever Continue from 7.2-3 © 2012 Benthin | Misprints, errors and changes reserved | 31-05-2012... -
Page 24: Service / Maintenance
Manual Pleated Fabric Cutter MPC 100 Service / Maintenance Safety Note! Only use accessories and spare parts made by Benthin. Attention! When changing the trapezoid blade, secure the cutting lever against accidental operation. CAUTION! Risk of injury due to improper maintenance work! Improper maintenance can lead to severe personal and property injuries. -
Page 25: Blade Replacement
Manual Pleated Fabric Cutter MPC 100 Service / Maintenance Blade replacement 1. Undo set screw 2. Remove cover 3. Undo screw 4. Remove mounting plate Caution! Risk of cuts 5. Remove blade 6. Insert new blade Important: Make sure that blade is... - Page 26 Manual Pleated Fabric Cutter MPC 100 Service / Maintenance 7. Fit mounting plate 8. Secure screw 9. Fit cover 10. Secure set screw © 2012 Benthin | Misprints, errors and changes reserved | 31-05-2012 ®...
-
Page 27: Errors And How To Eliminate Them
Manual Pleated Fabric Cutter MPC 100 Errors and how to eliminate them Service If an error occurs, please phone the service department: Company: BENTHIN TECHNOLOGY GmbH Street: Osterstaderstr. 16 City/Town: D-27572 Bremerhaven Phone: +49 (0) 471/7984-190 Fax: +49 (0) 471/7984-233 e-mail: service@benthin.com... - Page 29 Benthin Technology GmbH Osterstader Straße 16 D-27572 Bremerhaven Tel.: +49 471 79 84 190 Fax: +49 471 79 84 233 E-Mail: service@benthin.de Internet: www.benthin.com...
Need help?
Do you have a question about the MPC 100 and is the answer not in the manual?
Questions and answers