Table of Contents
Advertisement
Quick Links
Soundance Bluetooth Speaker User Manual
Model S1
Thank you for purchasing the Model S1 Bluetooth speaker. Please read this
manual carefully and keep it for future reference.
Features of the speaker
1. New Bluetooth Technology supports wireless control through a Bluetooth device
2. Large Screen display of Time, Alarm, Temperature, Battery level and Mode
3. Built-in FM radio with automatic channel searching
4. Plays MP3, WAV, WMA, APE, FLAC format audio files from a Micro SD card / TF
card and USB. Shuffle function when playing from a USB or Micro SD / TF card
5. 3.5mm line-in jack for wired devices
6. Built-in 2000mAh rechargeable battery
7. Two 45mm speaker drivers deliver 6W deep and rich sound
8. Built-in microphone for phone calls
9. Alarm setting for FM radio and music from a USB / Micro SD card. Repeat alarm
and snooze function
10. Built-in white noise and nature sound to aid sleeping
1
Advertisement
Table of Contents
Related Manuals for Soundance S1
Summary of Contents for Soundance S1
- Page 1 Soundance Bluetooth Speaker User Manual Model S1 Thank you for purchasing the Model S1 Bluetooth speaker. Please read this manual carefully and keep it for future reference. Features of the speaker 1. New Bluetooth Technology supports wireless control through a Bluetooth device 2.
- Page 2 ” button to enter Bluetooth mode, press the “ ” button again will exit to Time mode. Paring - When the speaker is in Bluetooth mode, turn on your Bluetooth device and search for Bluetooth equipment “S1”, and then pair up with the speaker.
- Page 3 Bluetooth phone call - When paired to your phone, press the “ ” button to answer incoming calls, press “ ” again to end the call. Hold the “ ” button to reject the call. Pressing the “ ” button twice will call the last incoming call number. (Note: Microphone is on top of the speaker, please talk into the microphone when making phone calls.) Track selection - When playing music in Bluetooth mode, press the “...
-
Page 4: Usb / Micro Sd Card
5. USB / Micro SD Card The speaker supports a USB / Micro SD card. Just plug your USB Flash Drive or Micro SD Card into the speaker’s USB port or Card slot and the speaker will play the music files automatically. Note - USB / Micro SD card is not supported when in FM mode. - Page 5 7.1 Press and hold the “ ” button to start alarm setting - ◇ Press the “ ” or “ ” button to set the hour and press the “ ” button to confirm, and then press the “ ” or “ ”...
-
Page 6: Sleep Timer
8. Aid Sleeping Press the “ ” button to aid sleeping sound setting. Press “ ” or “ ” button to select from the 6 default nature sounds. Press and hold “ ” or “ ” button to set the aid sleeping sound volume. If you want to stop the aid sleeping sound, please press the “... -
Page 7: Technical Data
11. Reset If the speaker is not working normally, insert the reset pink or a thin wire into the “R” hole on the rear side to reset. Technical Data Power Built-in high capacity Lithium Ion battery External USB 5V supply Power input: 1~2A Technical Frequency... -
Page 8: Troubleshooting
Troubleshooting ◇ Cannot turn the speaker on - Check if the battery is low. Charge the speaker and turn on again. ◇ Cannot charge the speaker - Check the power supply is working and that the output of the power supply to the charging cable is 5V and 1~2A. Check that the charging cable and connectors of the cable are not damaged. - Page 9 ◇ Charge the speaker regularly to avoid damage of battery result from low battery level. It’s recommended to charge the speaker from 5V 2A USB input. Tips When you use it as a clock or alarm clock, please keep the speaker connected to a charger to maintain adequate electricity.