Advertisement
Do you have a question about the SPWD1160C and is the answer not in the manual?
How do empty remains detergent from detergent/softener compartment
To remove empty remains of detergent from the Summit SPWD1160C detergent/softener compartment, follow these steps:1. Open the detergent drawer: Pull the detergent drawer out gently until it stops.2. Remove the drawer: Press down the release tab or lever (usually in the middle or side of the drawer) and pull the drawer out completely.3. Disassemble compartments: If the drawer has separate inserts or compartments for detergent and softener, remove them carefully for easier cleaning.4. Rinse with warm water: Rinse the drawer and all compartments under warm running water to remove detergent or softener residue.5. Use a soft brush: Use a soft brush or cloth to scrub away any stubborn remains, especially in corners and small areas.6. Clean the housing: Wipe the inside of the compartment housing (where the drawer slides in) with a damp cloth to remove any buildup.7. Dry and reassemble: Let all parts air-dry or dry with a towel. Reassemble the compartments and slide the drawer back into place.Regular cleaning helps prevent buildup and ensures proper detergent flow.
This answer is automatically generated
Need help?
Do you have a question about the SPWD1160C and is the answer not in the manual?
Questions and answers
How do empty remains detergent from detergent/softener compartment
To remove empty remains of detergent from the Summit SPWD1160C detergent/softener compartment, follow these steps:
1. Open the detergent drawer: Pull the detergent drawer out gently until it stops.
2. Remove the drawer: Press down the release tab or lever (usually in the middle or side of the drawer) and pull the drawer out completely.
3. Disassemble compartments: If the drawer has separate inserts or compartments for detergent and softener, remove them carefully for easier cleaning.
4. Rinse with warm water: Rinse the drawer and all compartments under warm running water to remove detergent or softener residue.
5. Use a soft brush: Use a soft brush or cloth to scrub away any stubborn remains, especially in corners and small areas.
6. Clean the housing: Wipe the inside of the compartment housing (where the drawer slides in) with a damp cloth to remove any buildup.
7. Dry and reassemble: Let all parts air-dry or dry with a towel. Reassemble the compartments and slide the drawer back into place.
Regular cleaning helps prevent buildup and ensures proper detergent flow.
This answer is automatically generated