Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ArcVision Technology Manuals
  4. Multiplexer
  5. ARC-19516
  6. User manual

ArcVision Technology ARC-19516 User Manual

Sixteen channels duplex video multiplexer
Hide thumbs

Advertisement

Quick Links

Download this manual
ARC-19516
Sixteen Channels Duplex
Video Multiplexer
User's Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the ARC-19516 and is the answer not in the manual?

Questions and answers

Related Manuals for ArcVision Technology ARC-19516

Summary of Contents for ArcVision Technology ARC-19516

  • Page 1 ARC-19516 Sixteen Channels Duplex Video Multiplexer User’s Manual...

  • Page 2: Table Of Contents

    1. Introduction ------------------------------------------------------------------- 2 2. Specification --------------------------------------------------------------------- 2 3. Installation ------------------------------------------------------------------------ 3 4. Function Key Description ------------------------------------------------------- 5 5. Operation Mode ----------------------------------------------------------------- 6 6. Recording and Playback ------------------------------------------------------ 7 7. Alarm Function ------------------------------------------------------------------ 8 8. Menu Set Up -------------------------------------------------------------------- 9 ArcVision Technology Corp.

  • Page 3: Introduction

    Up to 7 characters for each channel Timer generator Built-in RTC (real time clock) Dimension 432(W) x 270(D) x 44(H) mm DC 12V ±10﹪ Power source 18W(max), 1500mA@12V Power consumption Recommend adapter: DC 12V/1.5A switching mode power adapter ArcVision Technology Corp.

  • Page 4: Installation

    ALARM 7 External alarm input 7 Ground ALARM 10 External alarm input 10 ALARM 12 External alarm input 12 ALARM 13 External alarm input 13 ALARM 15 External alarm input 15 Ground RELAY OUT-COM Relay output common terminal ArcVision Technology Corp.
  • Page 5 Connect the BNC connector for “REC IN” to the VCR for “VIDEO OUT” on the VCR. 3.6 VIDEO IN & LOOP OUT The camera line is connected to Camera-Video IN and the nine-channel loop-out path is supplied for alternative usage. ArcVision Technology Corp.

  • Page 6: Function Key Description

    Move to the right item during editing procedure. ← → ↑ ↓(BLUE) Cursor movement for motion window setting. Pan or Tilt for zoom function. ┼ Next value. ─ Previous value. EXIT Exit the menu or editing procedure. ENTER Enter to sub-menu or editing procedure. ArcVision Technology Corp.

  • Page 7: Operation Mode

    <PLAYBACK> Menu set up Under normal or sequence mode, press key to enter menu set up mode. <MENU> Refer page 9, “8. Menu set up” for more details. 6. Recording and Playback ArcVision Technology Corp.

  • Page 8: Recording And Playback

    We recommend using this feature when user’s VCR recorder supports this feature. Using this feature the record time must be set to “SYNC” and interconnect VCR and ARC-19516. The acceptable trigger signal is a falling edge (negative) trigger. (b ) RECORD BY SETTING RECORDING TIME：...

  • Page 9: Alarm Function

    “ON” (if they are enabled in the menu set up). The event could also be written to the alarm list. (d) The multiplexer supports motion detection for each input camera. User can set motion window and detection sensitivity for each camera input. ArcVision Technology Corp.

  • Page 10: Menu Set Up

    No symbol：Denotes that user can press <-> <+> key to set value to the previous or the next and decrease or increase the numbers. (e) Item： Use the Figure 8-1 for example, ”TIMER/OSD SET UP” the first item selected by the “Item indicator”. ArcVision Technology Corp.
  • Page 11 LEFT TOP, TOP, RIGHT TOP, LEFT BOTTOM, BOTTOM and RIGHT BOTTOM. 8.1.7 TEXT COLOR The text color can be set to one of the following value: COLOR 0 White COLOR 2 Cyan COLOR 1 Green COLOR 3 Yellow ArcVision Technology Corp.
  • Page 12 <Sequence 24> Skip the sequence. 8.3 CALL CHANNEL SEQUENCE Setting The “CALL CHANNEL SEQUENCE” to config the video sequence for call monitor out. The setting method is very similar to “AUTO CHANNEL SEQUENCE” except the CAM can’t be set ‘H’(16-split images). ArcVision Technology Corp.
  • Page 13 8.4.2 CAMERA TITLE DISPLAY On the menu of Figure 8-4 select “CAMERA TITLE DISPLAY”, and press <ENTER> to enter the menu on Figure 8-6. Set to “ON” to display the camera titles and “OFF” for no title display. ArcVision Technology Corp.
  • Page 14 ALARM LIST BUZZER ENABLE:YES ALARM FULL SCREEN NO ALARM OUTPUT :YES ANY KEY TO STOP SHOW ALARM LIST ALARM 3 CLEAR ALARM LIST SENSOR ENABLE:YES SENSOR TYPE :N.O. BUZZER ENABLE:YES ALARM OUTPUT :YES Figure 8-9 Figure 8-10 ArcVision Technology Corp.
  • Page 15 Set on “YES” to turn the internal buzzer on if a valid video loss occurs. Set on “NO” to keep the buzzer to mute. 8.6.2.3 ALARM OUTPUT Set on “YES” to turn the relay on if a valid video loss occurs. Set on “NO” to keep relay to the current state. ArcVision Technology Corp.
  • Page 16 Set on “YES” to switch to full-view of the related camera from quad-view, when a valid alarm occurs. It will take effect under normal or sequence modes. Setting “NO” will keep the current viewing. 8.6.7 ANY KEY TO STOP ArcVision Technology Corp.
  • Page 17 Three are three kinds of parameters for video system setting: For color version： AUTO：Auto detects NTSC or PAL, if the “channel 1” camera connected. NTSC：Set video system as NTSC。 PAL：Set video system as PAL。 8.10 COLOR BAR ArcVision Technology Corp.
  • Page 18 LOAD DEFAULT SETTING AND CLEAR ALARM LIST LOAD DEFAULT SETTING Figure 8-16 8.11.1 LOAD DEFAULT SETTING AND CLEAR ALARM LIST Load the parameters of factory default and erase alarm list. 8.11.2 LOAD DEFAULT SETTING Load the parameters of factory default. ArcVision Technology Corp.