Advertisement
Manufacturer: O'Ryan Industries, Inc.
12711 NE 95th Street
Vancouver, Wa. 98682
Telephone:
1(800) 426-4311- 1(360) 892-0447
Website: http://www.oryanindustries.com
PoolStar Products
Instruction Manual for SP2526C
LED Underwater Light
IMPORTANT: This manual includes essential information on the safety measures to be
implemented for installation and start-up. Therefore, the installer, as well as the user,
must read these instructions before beginning installation and start-up.
Technical Specification
Standard input voltage: 12V AC/DC (Range: 12~18VAC or DC)
Standard input watt:
RGB / White
5W /7W (45 Normal LED)
Use life: 60,000 hours
16 programs with Synchronization capability
Advertisement
Table of Contents
Related Manuals for O'Ryan Industries SP2526C
Summary of Contents for O'Ryan Industries SP2526C
- Page 1 PoolStar Products Instruction Manual for SP2526C LED Underwater Light Manufacturer: O'Ryan Industries, Inc. 12711 NE 95th Street Vancouver, Wa. 98682 Telephone: 1(800) 426-4311- 1(360) 892-0447 Website: http://www.oryanindustries.com IMPORTANT: This manual includes essential information on the safety measures to be implemented for installation and start-up. Therefore, the installer, as well as the user, must read these instructions before beginning installation and start-up.
- Page 2 PoolStar Products Dimensions: Warranty Maintenance/Installation There is no maintenance required for this lamp – it is designed to be used only once, meaning The manufacturer warrants this LED underwater lights against defects in materials and workmanship for a period of one year from the date of purchase. This warranty does not cover that replacement is necessary if it becomes defective (repairing is impossible).
- Page 3 LED’s are driven by constant current. The technology of True PWM is adopted on the lights. the on/off switch of your pool lights. Just switch off and on within 2 seconds. • If the light is powered off for more than 20 seconds, it will keep the last program when it is High temperature protection causes the LED’s to be protected when the internal temperature turned on again.
- Page 4 • All lamps should be installed on the same transformer and switch. • The lights can be installed for both concrete pools and fiber pools. • The lights fit into standard pool 2’’ fittings. • The lamp is supplied with cable of 7ft., 12ft., 20ft.,30ft., 50ft. or 65ft. according to the need of user, making it possible to install multiple lamps connected to a single junction box.
Need help?
Do you have a question about the SP2526C and is the answer not in the manual?
Questions and answers