Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AIR8 1000i PRO
Summary of Contents for AIR8 1000i PRO
- Page 1 Clean Air System 1000i PRO...
-
Page 2: Table Of Contents
Table of contents Unpacking warning ....................3 Safety instructions ....................3 Intended Use ......................4 Technical data ......................4 Device description ....................5 Commissioning ....................... 6 WIFI connection ..................... 8 Filter replacement ....................11 Maintenance …………………………................12... -
Page 3: Unpacking Warning
In case of damage, do not try to repair the device yourself – always reach out to our AIR8 specialists for such procedures. Keep all safety instructions in case they are needed in the future. -
Page 4: Intended Use
The machine may only be used for its intended purpose. Any further use beyond this is not intended. The user/operator shall be liable for any damage or injury of any kind resulting therefrom. Technical data Product name: 1000i PRO Tension: 220-240V – 50 Hz Power rating: 143W CADR (Clean Air Delivery Rate): 1000 m3/h Timer: 1 –... -
Page 5: Device Description
Device description Figure 1: Figure 2: Display indicators... -
Page 6: Commissioning
Commissioning Connecting the device When you plug in the device, the readiness for operation is signalled acoustically and visually (lights turning on). Caution: Do not plug or unplug the device with wet hands. Power The power switch is used to turn the unit “on” and “off”. By default, the device is set on manual mode and the fan speed on level 1. - Page 7 When the filter replacement reminder icon is blinking the machine is indicating that the HEPA filter needs to be replaced. After replacing the filter, renew the filter life indicator as explained above. Remote control Press the buttons for the respective function. When you use the remote control, point it towards the air purifier.
-
Page 8: Wifi Connection
WIFI Connection Please note that the device is only compatible with 2.4 GHz networks. If you are using a 5 GHz network it might prevent you from connecting to it. In order to control your device via the app, you need to follow these steps: WIFI Activation To activate the WIFI connection, press the Mode button for 5 seconds until you hear the signal. - Page 9 There are 2 ways of adding a device: Option 1 – Add Manually • Select the “Add Manually” tab, then go to “Small Home Appliances” select “Air Purifier” • Make sure the air purifier is turned on and the WIFI function as well (indicator rapidly blinks).
- Page 10 Configure and control your device remotely You can edit the name of the device within the App. From the Dashboard you can control your device remotely:...
-
Page 11: Filter Replacement
Filter replacement The HEPA filter should be changed whenever the filter replacement reminder icon is blinking (after 3000 hours of use). Please ensure the product is Remove the protective foils of the switched-off and unplugged new composite filters (HEPA filter before opening it or dismantling and carbon filter). -
Page 12: Maintenance
Fan and motor 12 months heard, check if there is an external element in the ventilator. If the motor generates unusual noise, please contact our AIR8 specialists. Make sure the surface is not damaged. Pre-filter 3 months Pre-filter has to be cleaned every 3 months. - Page 13 air8.tech...
Need help?
Do you have a question about the 1000i PRO and is the answer not in the manual?
Questions and answers