BRP SeaDoo SEASCOOTER SDP95005 User Manual page 6

®
Using the SEA-DOO SEASCOOTER
for diving - adjusting the buoyancy.
Your SEASCOOTER ™ can be used for diving up to 30m/100ft
but will need to be adjusted for neutral buoyancy. The
SEASCOOTER ™ must never be adjusted for negative
buoyancy to avoid it sinking if accidentally released.
To adjust for neutral buoyancy follow these instructions
®
1. Make sure the SEA-DOO SEASCOOTER
is in the Off position.
2. Remove the SEASCOOTER ™ from the water, give a half
turn to the Latches, remove them (see figure 4) and
remove the Buoyancy Control Chamber.
o
Rotate 180 and remove to open
3. Open the Buoyancy Chamber and add a small amount of
rocks or a lead weight (see figure 5).
4. Replace the Buoyancy Chamber and the Nose Cone and
latches and place the SEASCOOTER
SEASCOOTER ™ is neutrally buoyant will just float in the
water.
7
VS Supercharged
™
VS Supercharged
™
Fig.4
™ in the water. If the
5. If the SEASCOOTER sinks, remove the weight until it is
™
neutrally buoyant.
If the SEASCOOTER ™ is still positively buoyant repeat step
3, until it is neutrally buoyant.
CAUTION
If the SEASCOOTER ™ is later used for swimming or
snorkeling be sure to remove the weight from the Buoyancy
®
Chamber so the SEA-DOO
Supercharged has positive buoyancy.
8
Fig.5
SEASCOOTER VS
™