Haier GWT750AW User Manual page 12

Delay (5)
• When not activated, the display shows a cycles' remaining wash time.
• When Delay Start is selected, the indicator light will display a minimum delay
of 2 hours. Push button once for every additional 1 hour delay for up to 24
hours.
Water Level (6)
• Water levels may be set at the beginning of the wash or in pause mode.
• D uring Soak, Wash or Rinse, press this button to manually replenish water.
Release for the water to stop. Function automatically is inactive when water
reaches the overflow protection level.
Signal (7)
• Signal volume can be adjusted soft–loud or off.
Soil Level (8)
• Select clothes soil level. There are 4 levels to choose from, Extra Heavy, Heavy,
Medium and Light.
• Wash cycle increases 2 minutes for each level increased. Selection should be
based on the soil level in clothes. The dirtier the clothes the heavier the level.
Temperature Wash / Rinse (9)
• To select inlet water temperature for wash and rinse. Selection here may vary
per the cycle chosen. All selections are not available in all cycles.
Off (10)
• If washer is ON push button once to shut off the power.
Start / Pause (11)
• O nce washer is powered and selections are chosen, push this button once to
start the wash.
• While unit is working, push this button once to pause it.
• If unit is in pause mode, push this button once to resume operation.
• If "Start/Pause" button is pressed to start the wash, the washer will display the
last cycle set. If any button except "Off" is pressed to start, the washer will no
start in the Heavy Duty cycle mode.
• If Start/Pause button isn't pressed within 5 minutes after powering "On" the
unit will automatically switch off and return to stand by mode.
English
11