Buffalo DriveStation HD-WSU2 Quick Setup Manual page 3

Using TurboUSB
To use TurboUSB, you must fi rst enable it. From the Start menu, choose
Programs > BUFFALO > TurboUSB > TurboUSB for HD-WSU2. (Fig: 2)
Click Enable and follow the instructions. (Fig: 3)
Once the wizard has completed, disconnect the DriveStation by clicking
on the 'Safely Remove Hardware' icon
reattach the USB cable from the DriveStation to fi nish activating TurboUSB.
Fig: 2
Fig: 3
2
in the systray. Then, remove and
EN
2