Advertisement
Quick Links
RE926S-03-00 WiFi Communicator with Z-wave
Features
Connects panels to local WiFi Network
•
Compatible with:
•
GE Simon XT
o
GE Simon XTi
o
Enables:
•
Alarm Reporting
o
Interactive Control Functions
o
Ethernet data reliability
o
Z-Wave Communicator included
o
Key Instructions
The same unit works for GE Simon XT & GE Simon XTi.
•
RE926S mounts inside the GE Simon XT panel and communicates with the
•
GE Simon XT and GE Simon XTi via the Expansion Connector.
Contains RF Module label – must be affixed to exterior of panel enclosure.
•
Operation
Event Reporting:
Events are reported to both the CMS monitoring receiver and the
SiteControl interactive server. All events use Contact ID reporting codes.
The following events are reported by default:
Alarms
Alarm cancels
Openings
Closings
System Low Battery
System Low Battery Restoral
AC Power Fail
AC Power Restoral
Interactive Control:
The system may be controlled remotely through the SiteControl interactive
platform.
Z-Wave
Z-Wave devices can be controlled via the Interactive function.
Siren (RE116-C)
Can be used with a Simon XT
Future: Simon XTi
Revert to Factory Default Button
Press and hold for 5 seconds: Resets the board and keeps all settings
Press and hold for 10 seconds: Reverts board back to the factory default settings
RE926S_WiFi Communicator
Page 1 of 6
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
Picture
Wi-Fi
Card
Status LEDs
Revert to
Factory
Default Button
Z-Wave
Antenna
LEDs
Ethernet LEDs
Power
(Green)
WiFi
(Red)
CS
(Red)
Platform
(Amber)
16-Jan-15
Indication
ON and Flashing once per second when the board is powered and
running
ON when the unit is registered with the local WiFi router
ON when the connection to the CMS central station is established
ON when the connection to the Panel, and connection to the
SiteControl interactive server is established
RE926S_WiFi Communicator
Page 2 of 6
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
WPS
Button
Z-Wave
Module
16-Jan-15
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Resolution Products RE926S-03-00
- Page 1 Picture Wi-Fi Card Status LEDs RE926S-03-00 WiFi Communicator with Z-wave Button Features Connects panels to local WiFi Network • Compatible with: • GE Simon XT GE Simon XTi Revert to Z-Wave Enables: • Factory Alarm Reporting Module Default Button Interactive Control Functions...
- Page 2 Expansion Connector Resolution Products, Inc. products will function with one of either GE, Honeywell, DSC or Napco systems. However, no Resolution product is produced by, endorsed by, nor is officially associated with GE, Honeywell, DSC or Napco. Resolution recommends verifying proper enrollment and operation, per control panel installation instructions, at installation.
- Page 3 IC Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: FCC Notice (1)This device may not cause interference, and This device complies with Part 15 of the FCC rules. Operation is subject to the following (2)This device must accept any interference, including interference that may cause two conditions: undesired operation of the device.
Need help?
Do you have a question about the RE926S-03-00 and is the answer not in the manual?
Questions and answers