Table of Contents
Advertisement
Remote control
Battery loading
1.Slide open the cover of the battery compartment on the back of the remote control.
2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to
respective mark)
3.Replace the cover of the battery compartment.
1
Precautions
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Keep the remote control away from
heat source or humid area to ensure
effective performance of the remote
controller.
6
2
Make sure that two AAA alkaline
batteries are loaded. The batteries must
be of the same type. The batteries must
be located properly. The batteries are not
rechargeable.
Make sure that there is no obstacle
between the remote control and television
set.
3
Advertisement
Table of Contents
