Vixen Horns VXS-9075AR Installation Manual

BEFORE BEGINNING YOUR INSTALLATION

Read through the entire instruction guide before getting started with the installation. Professional installation is
recommended for this product.

CONTENTS


120V Industrial Electric Motor Siren (Red)
The specific voltage requirement for this siren is 110-120 volt AC. Therefore installation must be
done with an AC power source of 110-120 volts.

SAFETY INSTRUCTIONS

 This product produces a very loud sound, hearing loss or permanent damage may result from improper use.
 Do not operate in a closed environment or near pedestrians.
 Do not connect the siren to any power source other than that specified above.
 Employ equipment for eye protection during drilling operations.

MOUNTING

 Identify a suitable area for mounting, preferably an unobstructed steady surface like a pole. Do not attach the
siren to a flexible material.
 Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a
drill.
 Secure the siren to the surface using four screws (not provided).
PAGE 1 of 2
VXS-9075AR
INSTALLATION GUIDE