Page 1
INSTRUCTION MANUAL Electrical Fireplace Stove with Heater Model No.: IFP606B Thank you for purchasing your new heater. These operating instructions will help you use it properly and safely. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers.
Page 2
SAFETY WARNINGS READ ALL INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE THIS UNIT. KEEP THE ASSEMBLY INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THE ASSEMBLY INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THE ORIGINAL PACKAGING FOR USE WHEN STORING THE HEATER DURING EXTENDED PERIODS OF NON-USE. Read ALL instructions before using this unit.
Page 3
SPECIFICATION Voltage Rating 120 V (60Hz) Power Consumption 1500W Unit Size 20.7 in. (W) x 8.7 in. (D) x 12.2 in. (H) Unit Weight 12.08 lbs SAFETY FEATURES Overheat Safety Feature This heater is equipped with a overheat safety feature. When the heater’s internal components reach a certain temperature that could cause overheat or possible fire, the heater will automatically shut off.
Page 4
Timer light: Indicate the timer mode Timer button: User setting timing boot or shutdown Heater button: Set up the heat mode and turn off the heat. Flame button: Set the brightness of the flame Power button: Powers the heater on and off Power button: Powers the heater on and off.
Page 5
NOTE: Please feel free to contact Service Team for help if the remote control is missing or damaged. Facebook: #SundayLiving Message: #SundayLiving Email: service@sundaylivinginc.com PREPARATION Place the heater on a firm, level surface and plug into a 120V 60Hz power outlet. Caution: The rear of the heater should be at least 4 inch away from the wall.
Page 6
2.Setting timer-power-off Caution! ONLY under power-on mode can you set timer-power-off function. When the unit is power on, press the Timer button to set timer-power-off function (through control panel or remote control). Under power-on, the timer light demonstrates the timer- power-off mode.
Page 7
3.Setting heat Under standby mode, press Heater button to start heater. Under standby mode, press the Heater button on the control panel or remote control, the heater will start (The heater indicator is under the artificial charcoal set. When heat is on, the charcoal set will be lit up and flicker automatically at a slow pace).
Page 8
STORAGE Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit. TROUBLESHOOTING If the heater will not operate, please check the following before seeking repair advice: 1.
Need help?
Do you have a question about the IFP606B and is the answer not in the manual?
Questions and answers