Page 1
L3730 DVD COMBINED 14" TV AND DVD PLAYER OWNER'S MANUAL Please read this manual carefully before using this TV set and keep it for future reference.
Please read this manual carefully before using this TV set and keep it for future reference. CONTENTS Before Operation Warning and cautions...2 Important satety instructions...3 Installation...5 Aerial connection...5 Preparation of the remote control...5 Function buttons and external sockets...6 Front panel of the TV set...6 Rear panel of the TV set...6...
Warning and cautions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE Uninsulated Dangerous Voltage, that may be of sufficient magnitude to constitute a risk of electric shock, is present within the cabinet of this unit.
Important safety instructions READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed.
Page 5
Important safety instructions (continued) 12. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.
Installation Aerial Connection If the picture is not clear or snowy, we recommend that you use an outdoor aerial.In different places, the suitable antenna type and position are different. twin-lead cable Antenna adapter (Not supplied) 75 coaxial cable Plug (Not supplied) Note: * It is recommended that a 75 ohm coaxial antenna is used to avoid interference.
36.DVD Zoom Button 37.Index 38.Hold 39.Teletext Mode/Swap Button 40.Time / Subcode 41.Reveal 42.Cancel 43.Enlarge 44.(NO FUNCTION) 45.Teletext On / Off 46.Mix 47.Red Button / TV Sound Menu 48.Green Button / TV Picture Menu 49.Yellow Button / TV Sleep Time Menu 50.Blue Button...
POWER MENU POWER Switching on/ off the TV set 1 To turn on the TV/DVD, press the Power button on the front panel. 2 If the indicator is lighting in red, press the P+/P- button on the panel or control, the power indicator will become green.
The unit can tune all the channels automatically. Auto Search MENU MENU MENU Automatic search 1 Press the TV MENU, until the TUNE menu display. 2 Press the P+/- buttons to select AUTO SEARCH. 3 Press V+ button to start auto search. The TV will begin memorizing all the channels available in your area.
Searching Channels (continued) Search MENU MENU MENU MENU Search 1 Press the TV MENU, until the TUNE menu display. 2 Press the P+/- buttons to select PROGRAM, then press the V-/+ buttons to select the program number you want to store.
1Press the P+/- buttons or PROGRAM NUMBER 0-9 button to choose desired channels. 2 Press the TV MENU until the TUNE menu appears. 3 Press the P+/- buttons to select " FINE TUNE". 4 Press V-/+ buttons to adjust for the best possible picture and sound results.
(continued) Exchange After auto search there may be some Program numbers duplicated and some blank. To re-order the channels: 1 Press the TV MENU until the PROG.EXCHANGE menu appears. 2 Press P+/- buttons to select PROG.I, then press the V+/- buttons to set desired program.
1 Press the P+/- buttons to select the desired program to be skipped. 2 Press the TV MENU until the TUNE menu appears. 3 Press the P+/- buttons to select "SKIP". 4 Press the V-/+ buttons to turn the SKIP function "ON".
Watching TV You can watch TV program in a preset channel. Watching TV program ¹ Û ¿ ´ µ ç Ê Ó ½ Ú Ä ¿ MENU MENU MUTE SLEEP Select the desired program 1 Using "Program number" buttons Directly enter the program number with the numeric keypad on the remote control.
Watching TV (continued) Program Swap TXT MODE/SWAP Program swap Swap function enables quick swap to the last watched program. 1 Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure).
Convenient picture control functions Multiple picture modes 1 Press the TV MENU until the PICTURE menu MENU 2 Press the P+/- buttons to select MENU How to select picture modes You can quickly select the desired picture mode from three factory preset modes and one customized mode.
3. Press V-/+ buttons to toggle through on and off. Game 1. Press TV MENU until SETUP menu appears. 2. Press P+/- buttons to select GAME, then press V-/+ buttons to enter game. 3. Use MENU to rotate clockwise, P+ button to rotate anti-clockwise.
Set up function TV Set Up MENU (continued) Calendar function Press TV MENU until SETUP menu appears. 2. Press P+/- buttons to select calendar, then press the V+ button to enter the Calendar. 3 Press the P+/- buttons to turn...
PRESS THE INDEX BUTTON TO GO TO THE INDEX PAGE OF TELETEXT. CANCEL PRESS ' ' BUTTON ALLOW YOU TO SEE THE TV PICTURE WHILE REMAINING IN TELETEXT MODE. THE TV MODE TEMPORARY. PRESS THE BUTTON AGAIN TO RETURN TO THE TELETEXT.
Using the unit in DVD Mode Basic Playback Preparations Press the TV/AV/DVD button on the front panel or TV/DVD on the remote control to enter the DVD status. Press the TV/AV/DVD button on the front panel or TV/DVD on the remote control again to return to the TV mode.
Advanced Playback Advanced Playback IMPORTANT NOTE: ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION AND DISPLAY ON SCREEN MAY DIFFERENT. SUBTITLE Press " SUBTITLE ", the screen will display "SUBTI- TLE 01/XX XXXXX", "01" indicates the ordinal number of this language;...
Each picture in the CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen. Some slide show transition modes are provided, use "PROG" key to select. Customer can set transition effects for each picture.
16 9 You may select this if you have a widescreen (16:9) TV . Back bars may still appear above and below the picture even if using a widescreen TV. This is because some film directors prefer to use ultra widescreen aspect ratios e.g.
Page 25
. HDCD: When default setting is off, it will display "CD" by reading HDCD, for HDCD playback, please choose 44.1K or 88.2K. ..General Setup Page.. TV Display 4:3 Lb Angle Mark OSD Lang Spdif Output Captions Screen Saver Off Hdcd ..General Setup Page..
Page 26
The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. TV TYPE: This player supports different TV output, including MULTI(Auto), NTSC, and PAL systems.Usually please set to AUTO.
Page 27
DVD player SETUP back to the manufacturers original settings. Press ENTER to perform the reset. Note: Some functions may not be available depending on the type of disc. ENTER/PLAY Resets all settings ..Preference Page.. TV Type Auto Parental Password Default Reset...
Playable Discs The following discs can be played: Support discs: DVD, VCD, CD-R, CD-RW, SVCD, DVCD, HDCD, JPEG,CD+G, Kodak CD , W MA. You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labeled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning.
Disc Protection and DVD Characteristics Compare DVD disc with other discs: Encode Digital/MPEG method Single- Double side -side Capacity single- single layer -layer 8.5G 4.7G Playing Time minutes minutes Disc diameter Horizontal More than 500 line resolution Picture proportion Subtitle Language 48KHz, 96KHz/ Sound quality...
Connecting the TV set to the other video and audio equipment Connecting to the other video and audio equipment You can attach optional equipment such as another TV or other audio amplification equipment to the scart/digital coaxial sockets at the rear of the set to enjoy higher quality sound and picture.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages inside that may cause a fatality or fire. 3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the materials in the cabinet expanding with room temperature changes.
Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD player will not play that disc. This Region number of this DVD Player is . L3730 DVD 50Hz...