Table of Contents
Advertisement
Manual Fine Tune
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to fine-tune
the channel manually.
1 Press MENU button repeatedly to select Ch.
2 Press
buttons to select Fine Tune.
3 Press
buttons repeatedly to start fine-tune
until the picture and the sound becomes satisfactory.
And press EXIT button to disappear the menu.
Skip The Channel Which You Don't Want
1 Press
buttons or direct-digit choosing
button to select a channel you want to skip.
2 Press MENU button continuously to select Ch
3 Press
buttons to select Add/Erase.
4 Press
buttons to switch it On.
5 Press EXIT key disappear the menu.
When you select channels with
will be skipped, However, you can also use the Direct-digit
Choosing button on the remote control to select this channel
directly.
Note recover the skipped channel
1 Use Direct-Digit Choosing button to select the number of the
channel to be recovered.
2 Press MENU button to select Ch.
3 Press
button to select Add/Erase and press
to switch into Off.
button, this channel
Manual Store
ATM
Fine Tune
Add/Erase
Off
Sound System
D/K
<V->/<V+> key to change
Advertisement
Table of Contents
