Echo CS-7310PW Operator's Manual page 31

CS-7310PW
7. Securely hold the chain saw
and pull starter handle until first
starting sound.
8. Push choke control knob (C) all
the way in (open
position).
9. Pull starter handle to start the
engine.
Note: Do not pull starter rope
out to the maximum
possible position.
Note: Do not allow recoil handle
to snap back against the
casing.
Note: If engine does not start after 5 pulls, repeat instructions.
After starting the engine, immediately squeeze and then
◆
release throttle trigger to release fast idle throttle latch,
otherwise severe brake damage can occur.
Never use fast idle throttle latch for cutting.
◆
Use the fast idle throttle latch only in starting.
◆
Note: Do not increase engine speed while chain brake is locked.
Severe brake damage will result.
X7503340600
© 12/20 ECHO Incorporated
choke
OPERATION
C
31