Using The Menus; Channel Menu; Video Menu - Haier L22C1120 Owner's Manual

USING THE MENUS

1. Press the Menu button to display or close
the main menu.
2. Use the Navigation Ring to move
around, select, adjust or confirm an item in
the OSD (On Screen Display) menu.
Press the Menu button to enter the main
OSD. Adjust the items including Video menu,
Audio menu, Feature menu, Channel
menu, and VGA menu. However, some
options in the menus may only be enabled in a
particular source mode.

CHANNEL MENU

The Channel menu in TV mode is shown
below.
CHANNEL
Tuning Band
Channel Strength
Auto CH Search
Add on CH Search
Channels List
Channel Labels
FAV Channel Setting
Move Select
ENTER
1. Tuning Band: Select TV source signal
from the Air (antenna) or Cable (CATV).
2. Channel Strength: Show the intensity of
the received DTV signal.
3. Auto CH Search: Automatically scan
all NTSC / ATSC TV channels and then
store them in the channel table. During the
channel scan process, the OSD will display
the number of channels which have been
found.
4. Add on CH Search: Rescan and add
channels which are newly found.
5. Channels List: Show the Channels List.
You can select which channels are viewable.
6. Channel Labels: Shows the NTSC /
ATSC TV Channel Labels. You can edit the
labels.
7. FAV Channel Setting: Show the Favorite
Channel List. You can add/remove channels
from the favorites list.
Air
Return Exit
Menu Exit
15

VIDEO MENU

The Video menu in most source modes
is shown below. It provides several video
adjustment items for fine tuning the video
display. Only in VGA source mode, the Video
menu provides: Picture mode, Brightness,
Contrast, Color Temp, Noise Reduction,
Backlight, Aspect Ratio and Preset.
VIDEO
Picture Mode
Brightness
Contrast
Sharpness
Color
Tint
Color Temp
Move Select
ENTER
1. Picture Mode: Adjust the best picture
appearance from selecting the preset value
of Vivid, Standard, Eco, Movie, or Personal.
2. Brightness: Video brightness adjustment,
the tuning range is 0 ~ 100.
3. Contrast: Video contrast adjustment, the
tuning range is 0 ~ 100.
4. Sharpness: Video sharpness adjustment,
the tuning range is 0 ~ 100.
5. Color: Video color chroma adjustment,
the tuning range is 0 ~ 100.
6. Tint: Video tint adjustment, the tuning
range is R50 ~ G50.
7. Color Temp: Three color temperature
modes. (Normal / Warm / Cool)
8. Noise Reduction: Gives four NR effect
degrees, such as: Low, Mid, High and Off.
9. Adaptive Contrast: Choose On or Off
to adjust the gamma after analyzing the
input signal automatically.
10. Backlight: Backlight strength adjustment,
the tuning range is 0 ~ 30.
11. Aspect Ratio: Choose the display aspect:
Normal, Zoom1, Wide, Zoom2, or HDMI
PC mode (Only for HDMI Video Source).
12. Preset: Restore the default video settings.
Vivid
40
30
50
62
0
Cool
Return Exit
Menu Exit