Table of Contents
Advertisement
Standard Repair Process Detail Technical Manual
symptom
Content
<55UJ63##-Z#>
Checking order when there is no audio
1.Check the contact condition of or 13V connector of Main Board
2. Measure the 13V input voltage supplied from Power Board
(If there is no input voltage, remove and check the connector)
3.Connect the tester RX1 to the speaker terminal and if you hear the Chik Chik sound when you touch the
GND and output terminal, the speaker is normal.
Error
C. Audio error_No audio/Normal video
Voltage and speaker checking method
when there is no audio
②
Power board side
A13
Established
date
Revised
date
①
③
1
SPK_R-
2
SPK_R+
3
SPK_L-
4
SPK_L+
Copyright © 2017 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
A13
Advertisement
Table of Contents
