Table of Contents
Advertisement
About the SD card
When disposing of or giving away the SD card, note that:
≥ Formatting and deletion of data on this unit or computer only changes the file management
information and does not completely delete the data in the SD card.
≥ It is recommended that the SD card is physically destroyed or the SD card is physically formatted
using this unit when disposing of or giving away the SD card.
To physically format the SD card, connect the unit via the AC adaptor, select [SETUP] #
[FORMAT MEDIA] # [YES] from the menu, and then press and hold the recording start/stop
button on the screen below for about 3 seconds. When the SD card data deletion screen appears,
select [YES], and then follow the on-screen instructions.
≥ The customer is responsible for the management of the data in the SD card.
LCD monitor
≥ When the LCD screen is dirty or condensation has occurred, please wipe it using a soft cloth such
as eyeglass cleaner.
≥ Do not touch the LCD monitor with your fingernails, or rub or press with strong force.
≥ It may become hard to see or hard to recognise the touch when the LCD protection sheet is
affixed.
≥ When the unit has become very cold, for example due to storage in a cold area, its LCD monitor
will be slightly darker than usual immediately after the unit is turned on. The normal brightness will
be restored when the unit's internal temperature rises.
Extremely high precision technology is employed to produce the LCD Monitor screen. The result
is more than 99.99% effective dots with a mere 0.01% of the dots inactive or always lit. However,
this is not a malfunction and does not affect the recorded picture.
- 192 -
Advertisement
Table of Contents
