Instruction Manual MOUNTING BRACKET TZ-3157 Model Number: This Instruction Manual describes important precautions to prevent any accident and procedures to handle this product.Read this Instruction Manual carefully to use this product safely. After reading, keep this in a safe place where users can refer to as needed.
1 Overview This is a EIA size bracket fitting for rack mount or table embedding of NT110 digital audio mixer. 2 Configuration Item name Quantity Remarks Mounting Bracket Paint color black. Mounting Screw M4x8mm, Paint color black. Handle Paint color black. Handle mounting screw M5x12mm, Paint color black.
5 Mounting method Mount the mounting brackets to the side of the NT110. Remove the NT110 exterior parts (side panels, pads). How to remove the exterior parts, refer to the NT110 instruction manual. Attach the handles to the mounting brackets. Use the mounting screws provided.
Page 11
Precautions for Embedding Installation When installing NT110 in a rack or table using mount bracket metal fittings, please use it correctly according to the following notes. When installing it, please structure with air circulation taken into consideration. To prevent excessive force from being applied to the cable connected to the NT110, and to ensure ventilation, please leave the following space open.
Page 12
About Customer Service If you experience any problems with our products and require any servicing, or have any questions about TAMURA product line, please contact your TAMURA sales representative or TAMURA at the following locations. To help speed up servicing and readjustment, please be ready to describe the problem accurately, what operations you were performing before and after it happened, or the history of usage.