Contents USER MANUAL 產品說明書 1. Cautions & Warning MICA HEATER 360°環迴快熱防水霧電暖爐 2. Product Diagram Model No.型號: CMH20 3. Operating Instruction 4. Maintenance 5. Product Specifications Before using your product for the first time, please read this instruction manual and keep it for future reference. 請於使用此產品前細閱本說明書並加以保存。...
socket, do not share electrical products in one socket to Cautions & Warning prevent any overloading and caused fire. Please read this section of "Cautions & Warning" carefully 4. When children, the elderly, disables and patient are using before using this heater this heater, there must have a guardian or adults for their ●...
Page 3
hands; otherwise it will lead to electric shock accidents. keep the product away from the heating element. 9. Do not bundle the power cord, pull the power cord, do not 16. Prohibited any object or instrument to cover or block the air place heavy objects on the power cord, do not heat or vent of the heater, periodically check the air vent and modify the power cord, prevent damaged power lines cause...
Page 4
to prevent electric shock. 9. The mica heater shall be placed directly below the power 4. When the socket unplugged, please hand grasp the plug, not socket. to seize power cord removed to prevent electric shock, short 10. The mica heater shall not be around bathtubs, sprinklers or circuit, fire and other accidents.
surface of the heater. Product Diagram Operating Instruction Remove the heater from packaging, take out from the packaging plastic bags, land on a dry, flat and secure ground. 2. Plug the heater's power cord, by using the specified connect 230-240V~ 50Hz power output.
Page 6
3. Turn on the heater by pressing the On/Off button (above Buttons on Remote Controller: Product Diagram - 4). To activate the remote controller, move out the battery Buttons on Control Panel: housing by 1) Hold the gate and push to the right 2) pull out the Power on battery tray at same time (see the above back view of remote Plug in the power supply, press the ON button...
Page 7
) on the screen, 00:00 will keep flashing, the Mica 3. Temperature setting: heater is ready for operation. Press button once to enter the temperature setting: The 2. Operation mode setting: Press button on control panel or remote controller to enter temperature digit flashes, press (Temperature increase the power saving mode...
Page 8
and can be set the temperature range from 5 ℃ to 38 ℃; 4. Timer settings: D) Frosting mode : the constant temperature is 7-10 Press button twice to enter the pre-set Timer On setting degrees, the temperature cannot be adjusted; When the room mode, the time digit flashes.
Page 9
setting by pressing button on control panel or remote controller. Overheating Protection Heater is equipped with a safety system for overheating, it will be shuttled down and also when machine occur due to blocked air intake, or covered by cloth with other reasons, overheating protection settings will play a role automatically to shut it down, In the process of pre-set Timer On or Off setting mode, we can press off button...
stain is serious, please put a cloth soaked in warm water or Automatic power-off neutral detergent, please wipe clean with a damp cloth, then Heater has a protection safety switch built-in, when the heater wipe with a dry cloth, fall off or tip-over, the unit will be switched off automatically 5.
Product Specifications Problem Remedial Actions Even the 1. Check whether the correct power output for the Product name: Mica Heater turn product is applied Model No.: CMH20 and press 2. Power plug is properly inserted into the socket Rated Voltage: 230-240V~ operations 3.