Advertisement
1. Always place the appliance on a flat, clean and non-slippery surface before operating.
2. Check whether the base of the hotpot and grill pan is intact before turning on the power.
3. Adjust the left knob to the "－" position, and then insert the power supply.
4. This grill pan is made of non-stick coating. Lightly lubricate the non-stick coating with a small amount of
oil.
5. Use only nylon, plastic or wooden utensils with care to avoid scratching the non-stick surface. Never
cut food on the grill pan.
6. Rotate the knob and the light will illuminate letting you know it is heating up. Rotate the knob to the
desired temperature range during cooking.
7. When the product is heated to a certain temperature during use, the indicator light on the thermostat
will automatically turn off. If the temperature is lower than the set temperature, it will automatically
light up and heat. The automatic temperature control design can protect the grill pan.
8. During use, please try not to move the electric hot pot or grill pan. When you need to move, please
hold the handles at both ends and do not touch the edge of the hot pot or grill pan to avoid accidental
burns.
9. Use medium to low heat for the best cooking results; very high temperatures can cause discoloration
and shorten the life span of the non-stick surface. If higher temperatures are necessary, preheat on
medium for a few minutes.
10. After use, turn the knob left to "－", unplug the power plug from outlet.
▪ This product is compatible with 120V/60Hz.
▪ Do not disassemble the product for any issues or problems. Please send to a certified Narita USA
technician for diagnosis and repairs.
▪ Do not operate if power cord is damaged, send directly to a certified Narita USA technician.
▪ Operate on a flat surface only, away from flammable materials like curtains.
HOW TO USE
WARNING
4
Advertisement
