Introduction; Prerequisites; Requirements; Components Used - Cisco WAN Interface Cards Cable WIC-1B-U Specifications

WIC−1B−S/T and WIC−1B−U WAN Interface Cards
Cable Specifications
Document ID: 46796

Introduction

Prerequisites

Requirements

Components Used

Conventions

WIC−1B−S/T Interface Card
Cables
ISDN BRI S/T Port Pinouts
BRI S/T WAN Interface Card LEDs
WIC−1B−U WAN Interface Card
ISDN BRI U Port Pinouts (RJ−45)
ISDN BRI U WAN Interface Card LEDs
ISDN BRI Cable Specifications
Related Information
Introduction
This document provides the technical specifications and cable requirements for the WIC−1B−S/T and
WIC−1B−U WAN interface cards.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
For more information on document conventions, see the Cisco Technical Tips Conventions.
WIC−1B−S/T Interface Card
Cisco − WIC−1B−S/T and WIC−1B−U WAN Interface Cards Cable Specifications