Advertisement
Table of Contents
Installation AND SAFETY INSTRUCTIONS
FOR YOUR SAFETY
WARNING: Be sure the electricity to the system you are
working on is turned off; either the fuse removed or the circuit
breaker set at off.
IF YOU ARE UNCLEAR AS TO HOW TO PROCEED,
CONTACT A QUALIFIED ELECTRICIAN.
CAUTION: BE SURE TO CHECK YOUR TRANSFORMER TO
DETERMINE THE VOLTAGE OF THE SYSTEM.
RISK OF FIRE: USE ONLY 12V LAMPS WITH 12V SYSTEMS.
USE OF 12V LAMPS WITH 24V SYSTEM MAY RESULT IN
DAMAGE TO SYSTEM AND SURROUNDING AREA.
CAUTION: RISK OF FIRE: MAXIMUM WATTAGE FOR RAIL
IS: 300W AT 12V; 500W AT 24V.
IMPORTANT SAFETY INSTRUCTIONS
1. Minimum distance from the front of the lamp to combustible
surfaces is 8".
2. Be sure to install the rail system where it can not be
shorted out by conductive materials.
3. Make sure all connections are tight.
4. This is a non-electrified support.
5. Space supports no greater than 4 feet apart for straight
sections.
WARNING: Use of other manufacturers components will
void warranty, E.T.L. listing and create a potential safety
hazard.
CAUTION - RISK OF FIRE. KEEP AWAY FROM
COMBUSTIBLE MATERIALS.
CANOPY
FITTER
STEM
LV-054
110102
www.SeaGullLighting.com
FIGURE 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ambiance LV-054
Summary of Contents for ambiance LV-054
- Page 1 5. Space supports no greater than 4 feet apart for straight sections. WARNING: Use of other manufacturers components will void warranty, E.T.L. listing and create a potential safety hazard. CAUTION - RISK OF FIRE. KEEP AWAY FROM COMBUSTIBLE MATERIALS. LV-054 110102 www.SeaGullLighting.com...
- Page 2 ASSEMBLY LV-054 NOTE: This support comes with 10 feet of field cuttable aircraft cable. To shorten the cable: 1. Loosen set screw on canopy. 2. Shorten aircraft cable to desired length. 3. Insert cable into canopy. 4. Secure with set screw.
Need help?
Do you have a question about the LV-054 and is the answer not in the manual?
Questions and answers