Table of Contents
Advertisement
Available languages
Available languages
General cleaning should be performed as needed and only takes five minutes or less.
1.
Clean the cabinet surfaces using a soft cloth and warm, soapy water. Rinse.
2.
Wipe dust in the back of the water cooler to improve efficiency.
3.
Remove drip tray cover and hand wash. Take a cloth and warm,
soapy water to rinse the inside of the drip tray. Rinse.
4.
Reattach drip tray.
5.
Clean the interior of the refrigerator with clean, soapy water.
Wipe dry with a non-abrasive cloth or towel.
6.
Wipe outside of refrigerator with a dry, non-abrasive cloth or towel.
Cleaning Water Lines & Cold Reservoir
Cleaning the water lines and reservoirs is recommended to happen once every
three months. NOTE: Recommended to do before loading a new 3 or 5 gallon jug.
1.
Unplug power cord from outlet.
2.
Remove water cooler bottle.
3.
Remove the plastic water guard and clean with warm, soapy water. Rinse.
4.
Fill stainless steel reservoir with a mixture of water
and bleach and let it sit for 30 minutes.
5.
Remove cleaning mixture by dispensing it from both taps into a bowl or pitcher.
6.
Wipe inside of reservoir with a soft
cloth and fill with water.
7.
Dispense water from both taps
into a bowl or pitcher.
8.
Repeat rinsing cycle if chlorine taste persists.
9.
Install a new bottle of water and plug in
the power cord into grounded outlet.
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IF DAMAGED WHEN YOU FIRST TAKE IT OUT
10
Advertisement
Chapters
Table of Contents
