Table of Contents
Advertisement
Tuning
The TV set has three methods to set the channels, which are Auto search, Search and Fine tune.
In this section, how to use the remote control to set the channel is explained. You can also use the buttons
on the TV set to set channel.
Auto Search
CH+
VOL-
MENU
VOL+
CH-
Auto search
1. Press the MENU button, and then
press the CH+/- buttons to select the
tuning menu. Press the VOL+ button
to enter the tuning menu.
2. Press the CH+/- buttons to move
the indicator to " AUTO".
3. Press the VOL+ button, and
"AUTO" Search mode will work.
The TV set will search
automatically all available programs,
after search is finished, all available
programs will be stored in turn.
If you want to stop the search,
just press the MENU button.
The order of the automatic search is due to the frequency of
the program, generally speaking, it is used only the first time
you search the program, and after the order of the program
has been made, you don't have to use this function,
otherwise the order of the program will be mixed.
After searching (Continued)
Press the CH+/- buttons to check channels.
If the colour or sound is abnormal in a certain channel, it may be
because that the colour or sound system has not been set
properly, then, you may adjust it to proper system (Refer to
page 8).
PICT
CHANNEL
SND
COLOR
FUNC
SND SYS
TIME
SKIP
POS.EX
CHNL
PICT
MANUAL
SND
AUTO
FINE
144.25M
FUNC
TIME
CHNL
10
AUTO
D/K
Off
Advertisement
Table of Contents
