Table of Contents
Advertisement
XV-M52SL/XV-M50BK
Removing the rear panel (See Fig.6)
Prior to performing the following procedure, remove
the top cover.
1.
Remove the eleven screws D
panel on the back of the body and detach the rear
panel.
Removing the DVD changer mechanism assembly
Prior to performing the following procedure, remove
the top cover and front panel assembly.
1.
Remove the one screw E.
2.
Disconnect the 9 pin wire from connector CN961 on
the power supply board.
3.
Disconnect the card wire from connector CN601 on
the video board.
4.
Disconnect the card wires from connector CN701
and CN702 on the system control board.
5.
Remove the four screws F
changer mechanism assembly.
It is easy for removing the front panel assembly to
remove the mechanism assembly though the
mechanism assembly can be removed even in the
state that the front panel assembly adheres.
1-6
attaching the rear
Power supply board
(See Fig.7)
CN961
attaching the DVD
D
D
Fig.6
F
F
F
F
DVD changer mechanism assembly
Fig.7
Rear panel
D
E
Video board
CN601
CN701
System control
board
CN702
Advertisement
Table of Contents
