Advertisement
How to Use
TOOLS
Fabric Tool: for use on upholstery
Crevice Tool: for use in corners and tight spaces
Dusting Tool: for use on curtains and ceilings
Floor Tool: for use on hard floors or low-profile carpets
(adjustment switch is down for hard floors, up for
carpets or rugs)
ATTACH A TOOL TO THE VACUUM FOR CLOSE JOBS
1. Align and attach the wide end of the adapter to the vacuum. The adapter will
click into place (you may have to depress the adapter release button to make it
snug).
2. Snuggly attach the desired tool over the narrow end of the adapter.
3. Plug the power cord into an electrical outlet.
4. Depress the power switch to operate.
5. When finished, turn off the vacuum and unplug from the outlet.
Adapter
6
Wards.com
How to Use (cont.)
ATTACH A TOOL WITH THE TUBE FOR A LONGER REACH
1. Align and attach the wide end of the adapter to the vacuum. The adapter will
click into place (you may have to depress the adapter release button to make it
snug).
2. Snuggly attach the wider end of the telescoping tube over the narrow end of the
adapter.
3. Snuggly attach the desired tool over the narrow end of the tube.
4. Depress the lock button on the tube to extend or retract the length of the
telescoping tube.
5. Plug the power cord into an electrical outlet.
6. Depress the power switch to operate.
7. When finished, turn off the vacuum and unplug from the outlet.
Telescoping Tube
Lock Button
1
888
•
557
3848
•
•
7
Advertisement
