Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SMART-AVI HDMV-9X-PLUS
Summary of Contents for SMART-AVI HDMV-9X-PLUS
- Page 1 1-800-284-2131 www.smartavi.com 9-Port KVM HD Multiviewer for a Single Monitor...
- Page 2 TECHNICAL SPECIFICATIONS_____________________________________________________________ WHAT’S IN THE BOX?_____________________________________________________________________ FRONT AND REAR________________________________________________________________________ INSTALLATION____________________________________________________________________________ SYSTEM OPERATION______________________________________________________________________ SELECTING VIEWING MODES_____________________________________________________________ RESOLUTION BUTTON____________________________________________________________________ RS-232 AND HOTKEY COMMANDS_______________________________________________________ TROUBLESHOOTING______________________________________________________________________ TECHNICAL SUPPORT_____________________________________________________________________ LIMITED WARRANTY STATEMENT________________________________________________________ 9-Port KVM HD Multiviewer for a Single Monitor...
- Page 3 VIDEO Format HDMI Video Bandwidth 3Gbps Input Interface (9) HDMI 19-pin (female) Output Interface (1) HDMI 19-pin (female) HDMI Compliance HDMI 1.4b HDCP Compliance HDCP 1.4 Resolution Up to 4K2K @ 30 Hz 5 volts p-p (TTL) Input Equalization Automatic Input Cable Length Up to 20 ft.
- Page 4 HDMV-9X-PLUS 9-Port HDMI, USB Real-Time Multiviewer and KVM Switch. PS12VD3A 12V DC, 3A (minimum) power adapter with center-pin positive polarity. User Manual 9-Port KVM HD Multiviewer for a Single Monitor...
- Page 5 8. Optionally connect a RS-232 Cable to the RS-232 port. 9. Finally, power on the KVM by connecting a 12VDC power supply to the power connector, and then turn on all the computers. HDMV-9X-PLUS Shown 9-Port KVM HD Multiviewer for a Single Monitor...
- Page 6 When selecting a channel by pressing buttons 1-9 on the front panel, the blue backlight LED will light up to indicate that input is selected. There are a total of 8 viewing modes within the 4 categories, this is a list of all the modes based on the Number given in the command protocol: 1 - Full Screen 2 - Dual (Split)
- Page 7 Each section of the display can be considered a separate “output”. To configure input and output for any of the 8 display modes the following command is used: IN -> [select input 1-9] -> OUT -> [select output 1-9] ex. Dual Mode (split) Input 1 is display on Output 1.
- Page 8 720p 1360 x 768 1024 x 768 The HDMV-9X-PLUS may also be controlled via RS-232 and Hotkey commands. For RS-232, you must use HyperTerminal or an alternative terminal application. The settings for the connection are as follows: Baudrate 115200; Data Bits 8; Parity None; Stop Bits 1; Flow Control None.
- Page 9 No Power Make sure that the power adapter is securely connected to the power connector of the unit. Check the output voltage of the power supply and make sure that the voltage value is around 12VDC. Replace the power supply. No Video ...
- Page 10 A. Extent of limited warranty SmartAVI, Inc. warrants to the end-user customers that the SmartAVI product specified above will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase.
- Page 11 The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
Need help?
Do you have a question about the HDMV-9X-PLUS and is the answer not in the manual?
Questions and answers