Mobotix PT DX7 Operating Instructions Manual

Pan tilt unit with usb-connection

Advertisement

Quick Links

OPERATING INSTRUCTIONS
PT DX7 Pan Tilt Unit with USB-Connection for MOBOTIX-Cameras
Article No. / EAN: 0745751300718
Material
Load capacity
Weight
Rotation range
Rotation speed
Tilt range
Tilt speed
Dimensions
Presets
Tours
Operating voltage
Power consumption
Protection class
Max ambient temperature
Pack size without supplies
2 pcs in one carton
Customs Tarif Code: 85437090
Features
Cast aluminium/powder-coated
4Kg
6Kg (Incl. packaging 8Kg)
360° (endless)
60°/s
-80° -> +25°
40°/s
360x165x185mm
128
4
38-56VDC Pin 4/5+ 7/8-
15W
IP66
-40° - +55°
51 × 42 × 26 cm
carton: 60 × 50 × 52 cm
1/11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PT DX7 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mobotix PT DX7

  • Page 1 OPERATING INSTRUCTIONS PT DX7 Pan Tilt Unit with USB-Connection for MOBOTIX-Cameras Article No. / EAN: 0745751300718 Customs Tarif Code: 85437090 Features Material Cast aluminium/powder-coated Load capacity Weight 6Kg (Incl. packaging 8Kg) Rotation range 360° (endless) Rotation speed 60°/s Tilt range -80°...
  • Page 2 INSTRUCTIONS Packing contents 1 x Pan & Tilt motor 1 x Bag with bolts an screws for mounting the camera 1 Passive-PoE Adapter After the delivery, check that the packing is not damaged and shows no evident signs of falls or abrasions. If this should be the case, immediately contact the supplier. Check that the contents correspond to the above-mentioned list of materials.
  • Page 3: Camera Position

    Mounting ATTENTION: Before powering the P/T-Unit, you have to take notice of the mounting-position. The camera and possible mounting-devices may not come in contact with other parts. All screws must be tightend. The P/T-Unit must be mounted horizontal in all areas. Camera Position Startup-Procedure Before connecting the appliance:...
  • Page 4: Connection Plan

    Connection plan The cables, coming out of the top of the unit, must be connected without benchs and pinch points. (refering to the Mobotix guidelines) 100-240V~ 50-/60Hz incl. 1m MX-OPT-CBL-LAN (optional: 2m / 5m / 10m) Passive-PoE Adapter Pins 1, 2, 4, 5 (+)
  • Page 5 Settings for MOBOTIX Cameras Admin Menü Network Setup Ethernet Interface 5/11...
  • Page 6 Settings for MOBOTIX Cameras Admin Menü Hardware-Configuration Manage Hardware Expansions 6/11...
  • Page 7 Settings for MOBOTIX Cameras Admin Menü Serial Interface Setup of serial interface, modem and weather station 7/11...
  • Page 8 Settings for MOBOTIX Cameras 4. Define Softbuttons Admin Menü Page Administration Softbuttons You can find the Commands for the different Functions on the last Page. 8/11...
  • Page 9 Settings for MOBOTIX Cameras Insert Softbuttons Click on a Softbutton, holding the „Shift“-Button Choose the Position for the new Softbutton. and then choose the Function you want to have. 9/11...
  • Page 10 Settings for MOBOTIX Cameras Calling Presets at predefined Times Admin Menü Transfer Profiles IP Notify Profiles Data Type: action=putrs232&rs232outtext= z.B. %AO%0E...usw. 7. Timing Admin Menü Camera Adminstration Time Tasks IP NOTIFY “HttpRequest“ (Example is on 1 Minute) 10/11...
  • Page 11: Control Commands

    Control Commands Right Slow %FF%01%00%08%00%01%0A Slow %FF%01%00%02%01%00%04 %FF%01%00%08%00%0F%18 %FF%01%00%02%0F%00%12 Medium %FF%01%00%08%00%1F%28 Medium %FF%01%00%02%1F%00%22 %FF%01%00%08%00%2F%38 %FF%01%00%02%2F%00%32 Fast %FF%01%00%08%00%FF%08 Fast %FF%01%00%02%FF%00%02 Down Left Slow %FF%01%00%10%00%01%12 Slow %FF%01%00%04%01%00%06 %FF%01%00%10%00%0F%20 %FF%01%00%04%0F%00%14 Medium %FF%01%00%10%00%1F%30 Medium %FF%01%00%04%1F%00%24 %FF%01%00%10%00%2F%40 %FF%01%00%04%2F%00%34 Fast %FF%01%00%10%00%FF%10 Fast %FF%01%00%04%FF%00%04 Stop Remote Reset %FF%01%00%00%00%00%01 %FF%01%00%0F%00%00%10 Tour Record Start...

Table of Contents