Page 2
AQT530 measures gaseous pollutants and particles in the ambient air. AQT530 is specifically designed for air quality monitoring networks in areas with tra c, road networks, or around transportation hubs. This product is intended for outdoor use and can be used in wet locations (IP65).
• Drilling tools Configuration and maintenance Installing AQT530 to BWS500 Needed configuration depends on your If AQT530 is installed to Vaisala Beacon system. Follow the instructions on the next Station BWS500, follow the instructions page or see AQT530 Configuration Guide...
Page 4
Setting up Installing sensor Connect AQT530 to a computer with the service cable kit. Attach brackets to the pole mast, sensor communication support arm, or wall. Pole mast Sensor support arm Wall Serial port configuration AQT530 can be mounted may be needed if sensor is on Ø...
Vaisala assumes no liability for the customer's failure to comply with these requirements. WARNING! If the equipment is used in a manner not specified by Vaisala, the protection provided by the equipment may be impaired.