Do you have a question about the PW01Z and is the answer not in the manual?
Questions and answers
Summary of Contents for MOKENEYE PW01Z
Page 1
Owner’s Manual VERSION: PW01Z-EN-01 20V CORDLESS PRESSURE WASHER Model PW01Z WARNING: To reduce the risk of injury, the user must read and understand the Owner's Manual before using this product. Save these instructions for future reference. support@mokeneye.com For Customer Service...
WORK AREA SAFETY TABLE OF CONTENTS ⚫ Keep work area clean and well lit. Cluttered or SPECIFICATIONS ........2 dark areas invite accidents. ⚫ Do not operate power tools in explosive GENERAL SAFETY WARNINGS ....2 atmospheres, such as in the presence of flammable liquids, gases or dust.
⚫ Do not overreach. Keep proper footing and BATTERY TOOL USE AND CARE balance at all times. This enables better control of the power tool in unexpected situations. ⚫ Recharge only with the charger specified by the manufacturer. A charger that is suitable for one ⚫...
- Do not overreach or stand on unstable support. - The pressure washer should not be used in areas Keep good footing and balance at all times. where gas vapors may be present. An electric spark could cause an explosion or fire. - Follow the maintenance instruction specified in the manual.
Page 5
NOTICE: Equipment and/or property damage may SYMBOLS (CERTIFICATION result if these instructions are not followed. INFORMATION) The operation of any power tools can result in foreign objects being IMPORTANT: Some of the following symbols for thrown into your eyes, which can result in severe certification information may be used on your tool.
NOTE: If the charger does not charge the battery manuals for detailed operating information. pack under normal circumstances, return both the battery pack and charger to your nearest Mokeneye FUEL GAUGE BATTERY PACKS Authorized Service Center for electrical check. - Charge the battery pack only with the charger Some MOKENEYE battery packs include a fuel provided.
Page 11
LED. After 30 minutes, reinsert the battery pack TO ATTACH THE SPRAY WAND in the charger. If the green LED continues to remain on, return battery pack to your nearest Mokeneye See Fig. 3 Authorized Service Center for checking or replacing.
- Insert the end of the soap bottle into the PROPER HAND POSITION opening on the pressure washer. Push in and turn the soap bottle clockwise until its secured See Fig. 9 into working position as shown. - To remove the attachment, push in and turn the soap bottle counterclockwise and pull from the ◼...
MOKENEYE warrants to the original purchaser only, personnel may result in misplacing of internal wires that all MOKENEYE consumer POWER TOOLS will be and components which could cause serious hazard. free from defects in material or workmanship for a We recommend that all tool service be performed period of one years from date of purchase.
Need help?
Do you have a question about the PW01Z and is the answer not in the manual?
Questions and answers