Advertisement
WiFi Setup
A wired Ethernet connection is recommended as wired connections tend to be more reliable. However, Z-NET may also
be configured to work over WiFi if necessary. To enable WiFi, follow the steps below.
1. Navigate to find.homeseer.com to access the system finder. You should see two links displayed, one for your
HomeTroller hub (or HS4 system) and one for your Z-NET. Click the link for your Z-NET (Z-NET-R2 in the example
below).
2. The Z-NET Configuration screen will now appear. Enter your WiFi SSID, Password, Security type and Encryption type
into the Wireless section of the screen.
3. Click the Submit button. The unit will reboot automatically and will then connect to your WiFi network.
For additional Z-Wave documentation visit: https://docs.homeseer.com/display/HSPIKB/Z-Wave
Contact Information
HomeSeer, 10 Commerce Park North, Ste 10, Bedford, NH 03110
Technical Support
Web: homeseer.com/support
Documentation: docs.homeseer.com
Email: support@homeseer.com
Phone: +1-603-471-2816
This product employs or practices certain features and/or methods of the following U.S. Patents: U.S. Patent Nos.6,891,838,
6,914,893 and 7,103,511.
Social Media
Facebook: facebook.com/HomeSeer
YouTube: youtube.com/HomeSeer
Twitter: @HomeSeer
Instagram: @HomeSeer
Z-NET-R2 Quick Start Guide V1.0 | Page 2
Advertisement
