S-MANIA HAIRWONDER Instructions

INSTRUCTIONS
MINI HAIR CRIMPING IRON
HAIRWONDER
PACKAGE CONTENTS
• HairWonder crimping iron
• Plastic box
TECHNICAL SPECIFICATIONS
• Rated voltage: 220 V DC 50–60 Hz
• Rated power: 20 W
Working temperature: 140–220 °C
•
• Size: 17 × 1.8 × 2.6 cm
COMPONENTS
1. Ceramic hot plate
2. ON/OFF switch
3. Indicator light
4. Spring
HOW TO USE
• Plug the device's power cable into an
electrical socket.
• Use the ON/OFF switch (2) to turn on the
device. The red light (3) indicates that the
device is turned on.
• Wait 30 seconds or more for the device to
heat up.
• Use the device to style your hair.
• Make sure your hair is clean and dry when
using the hair crimping iron to ensure the
best results.
• Turn off and disconnect from electricity
after use.
• Let the hot plate cool down before storing
the device in its original packaging.
• DO NOT wrap the cord around the
crimping iron
O CERAMIC COATING
Protects the hair during styling with even
heat distribution that penetrates each
hair strand quickly from inside out for less
damage.
O STYLING TIPS
• This device is used for crimping your hair.
Take note that dry and straightened hair
•
typically produces the best crimps. Any bit
of moisture in your hair can fry your
strands and cause damage.
• Start with clean and conditioned hair
before you start crimping your hair.
Brush and then comb your hair to make
•
sure it's completely knot- and tangle-free
before starting.
To effectively crimp your hair, you'll need
•
to work in very small, workable sections.
Start with the bottom layer of hair on top
of your head and work your way down.
• Clamp each thin section for a few
seconds, lift to see if your crimps have set,
and then you can keep going down your
hair. Continue clamping and repeating
until you finished crimping all of your hair
or a few sections.
Turn the device off after styling and wait
•
for it to cool down before storing it.