Page 1 Verifying that the Modem is Properly Installed Changing the COM Port Changing the IRQ Setting Accessing an Outside Line (Configuring the Modem to dial with PBX System) Uninstalling the Modem Driver Installing the Modem Driver Troubleshooting Quick Guide for HSP MicroModem 56K...
Page 2 3. If the Location Information window appears, choose and type your location information and click Close. 4. When the Modems Properties window appears, you should see a description of your modem. If your modem is not installed, this description will not appear. Quick Guide for HSP MicroModem 56K...
Page 3 6. Click the COM port your modem is using and then click the More Info button. The "More Info" window will be displayed. If the modem displays information to the system, it is installed correctly. 7. Click OK and then click OK. Quick Guide for HSP MicroModem 56K...
Page 4 Follow the next steps to change the modem to a desired COM port: 1. Click the Start button, point to Settings and click Control Panel. 2. Double-click the HSP Modem icon. The HSP Modem window will be displayed. 3. Select the desired COM port and click the Apply button.
Page 5 4. When the HSP MicroModem 56 Properties window appears, click the Connection tab. 5. Remove the check sign by clicking the small box, labeled "Wait for dial tone before dialing." 6. Click the OK button on the HSP MicroModem 56 Properties window.
Page 6 2. If "Search for the best driver for your device." radio button is selected at the following window, click Next. 3. Insert the Restore CD supplied into the CD-ROM drive. 4. When the following window appears, type in D:\DRIVERS\MODEM and click Next. Quick Guide for HSP MicroModem 56K...
Page 7 5. Click Next. 6. Click the Finish button. 7. When the "HSP Modem Country Selection" window is displayed, select your country and click OK. Note To install the modem driver by using the Installation Program of the Restore CD, you must reboot the computer after the files are copied. When your system is rebooting, remove the Restore CD from the CD-ROM drive.
Page 8 • Addition to the solutions above, you can use the Windows 98 Modem Troubleshooter. Press the F1 key at the active desktop window, click Troubleshooting on the Contents tab, click Windows 98 Troubleshooters, and click Modem. Quick Guide for HSP MicroModem 56K...