Ing Programme; Example Of Prog Ramming A Cook Ing Programme - Haier MK-2280M User Manual

Example of programming
a cooking programme
Time Adjust
Med
Low
Stop
1
2
3
4
M.H.
High
5
6
Power Level
7
3.minutes cooking/simmerin with
Medium high(M.H.)power level
Appliance is in Stand-by mode
1. Open the appliance door and place the food
on the turntable inside
2.Close the appliance door.
3. Touch / release knob (5) and turn the
released knob clockwise to the right until
the mark (6) is in line with the M.H power
level.
4. Touch / release knob (4) and turn the released
knob clockwise until the indicator light (1) lig-
hts up and the number of minutes 03 is
shown in the display (2).
The programme starts 2-3 seconds after the
cooking time stops being altered.
The remaining cooking time is continuously
shown in the display (2). (The clock counts
down)
5. Lf required, the power level and the cooking
time can be altered while the appliance
oper ates.
6. When the cooking programme is completed,
the figure 00 is s hownin the d isplay(2) a nd
5 short beeps indicate the end of the programme.
7. Open the appliance door and take the cooked
food out of the appliance. (Use oven gloves)
8.After each programme end, turn the power level
knob (5) to the Stop position to prevent the
appliance from being inadvertently op erated
without food. (This can damage the appliance)
9. Allow the food to rest to one side briefly efore
serving. Lt can thus cook inside a little more
and can cause burns if eaten immediately.
ID CODE 030MWO