Table of Contents
Advertisement
Quick Links
Genesis Electronics Australia Pty Ltd
www.genesiselectronics.com.au
info@genesiselectronics.com.au
Australian Owned, Designed and Manufactured
Distributed By:-
Genesis reserves the right to change or modify products without notice.
This manual assumes installers of this product are professionals within
the electronic security, access control and automation industry. As such,
knowledge of these industries on the part of the installer is assumed.
Genesis takes no responsibility for any damage, financial loss or injury
caused to any equipment, property or persons resulting from the correct
or incorrect use of any Genesis devices.
genesis
Table of Contents
TABLE OF CONTENTS
Page 2
LAN Splitter - Technical Manual
2
3
4
5
6
6
7
8
9
10
11
Version 4 – November 2006
LAN Splitter
TECHNICAL MANUAL
genesis
...The very latest innovation in security and access
genesis
Example 1
There are several examples of GEN129 LAN
Splitter modules on the LAN. Termination
LINKS indicated on the LAN devices with LINK
in place as is indicated below.
MU
GEN129
TDC
TDC
LINK
LINK
EU8
TDC
LINK
LINK
If the GEN129 is last devices on the LAN, termination
LINK must be placed on the GEN129 module as well
Example 2
as each one of the last splitter terminations. If one or
more LAN splitter terminations are not used they can
be left unterminated.
MU
To other LAN devices. Please note that only the last LAN
device must be terminated on the LAN from the MU.
GEN129
TDC
TDC
TDC
LINK
LINK
TDC
TDC
LINK
LINK
Each one of the last LAN devices of
If the GEN129 is not the last LAN device on the LAN from the MU it
will not need to have LAN terminated. However, please note that
each termination needs to have LAN
each one of the splitter terminations of each GEN129 needs to
termination LINK as the last device on
have the last LAN device terminated.
the LAN as is indicated above.
Page 11
GEN-129
LAN Splitter – Manual, November 2006
Genesis Electronics Australia Pty Ltd
www.genesiselectronics.com.au
info@genesiselectronics.com.au
LAN Splitter - Technical Manual
RAS
OC
GEN129
LINK
LINK
LINK
TDC
LINK
EU8
RAS
RAS
GEN129
LINK
LINK
TDC
RAS
LINK
Version 4 – November 2006
Advertisement
Table of Contents
Summary of Contents for Genesis GEN-129
- Page 1 Australian Owned, Designed and Manufactured Distributed By:- TECHNICAL MANUAL Genesis reserves the right to change or modify products without notice. This manual assumes installers of this product are professionals within genesis the electronic security, access control and automation industry. As such, LAN Splitter –...
- Page 2 Unit Last LAN Device: GEN010 The last device on the Genesis LAN must be fitted with its It is recommended to use a separate power supply, located near the LAN termination link. This link fits a 180Ω splitter. DO NOT common the 0v DC, or +12v DC, of power supplies and resistor to the last device on the LAN.
- Page 3 Genesis LAN in the recommended method. devices connected to the unit. To this end, it must be twisted pair data cable that is used for the Genesis LAN. The GEN129 is ideal when your LAN devices are located in Belden 8723 (RS-485) cable, or equivalent is recommended.
Need help?
Do you have a question about the GEN-129 and is the answer not in the manual?
Questions and answers