Advertisement
Parts Included:
Slim Jim
Recycling Station Assembly Guide
®
*Billboards, Lid Inserts, and Labels not included with 23G and 33G
Slim Jim Recycling Station Starter Kits (2007913 and 2171553)
Align Base to Connector
1. Align connector underneath base rim, matching tabs to
respective holes.
Attach Connector to Base
2. Slide connector upward until tabs click into place.
Connect Additional Base
3. Lift second base on top of connector, pressing down on base to
snap tabs into place.
Bases
Connectors
Lids
Billboards*
Lid inserts*
Labels x10*
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rubbermaid Slim Jim
Summary of Contents for Rubbermaid Slim Jim
- Page 1 Lid inserts* Lids Labels x10* *Billboards, Lid Inserts, and Labels not included with 23G and 33G Slim Jim Recycling Station Starter Kits (2007913 and 2171553) Align Base to Connector 1. Align connector underneath base rim, matching tabs to respective holes.
- Page 2 After inserting one peg, pull the gray tab to the side on the other peg for an easier connection. Attach Lids to Base 9. Place lids on top of the bases. 2175916 ©2022 Rubbermaid Commercial Products LLC | 8900 Northpointe Executive Park Drive, Huntersville, NC 28078 | Phone: 1-800-347-9800 | www.rubbermaidcommercial.com...
Need help?
Do you have a question about the Slim Jim and is the answer not in the manual?
Questions and answers