Package List RC Drone Remote Control Battery Opener Screwdriver Blades Guard DANGER Only suitable for age 14+ D15 Mini Drone User Manual support.it@ sansisco.com support.de@ sansisco.com Email: support@sansisco.com support.es@ sansisco.com support.fr@ sansisco.com Web: www.sansisco.com support.jp@sansisco.com support.uk@ sansisco.com Extra Propellers USB Charging Cable...
Safety Precaution 1. In order to ensure the requirements of electromagnetic environment of aviation radio station, it is forbidden to use all kinds of model remote controllers in the area with radius of 5000m and center point of airport runway. During the period when the relevant national departments issue radio control orders, the remote controller of the model shall be stopped according to the requirements.
Trouble Shooting Problem Analysis Solution The indicator of the 1. The remote control is 1. Perform frequency drone flashes slowly not connected to the matching operations. drone and does not respond 2. Recharge the battery. 2. Low battery to the remote control. 1.
1. Turn on the drone. 2. Enter the “Settings” menu of your mobile device. 3. Then turn on “WIFI” and connect to the WIFI of the "Sansisco D15-xxxxx" 4. Open the APP, you would see the real-time video from the drone camera, and you now can start your flight.
Aircraft Profile Camera Motor Indicator light Propeller The aircraft has two types of blades ("A" and "B"). The logo "A" or "B" is printed on the arm and propeller respectively. When replacing propeller, please match according to the corresponding "A" or "B" logo. Propeller guard Power button (Long press the power button to turn on / off the aircraft.)
Page 8
Install the propeller Opener Install the battery Install the protective guard Charge Charge the battery as shown in the figure. When charging, the red light of USB charger will be on. After charging, the red light of USB charger will be off. - 06 -...
Remote Control Profile Slow / Normal / Fast Photo / Video (Short press to switch the flying speed) (Short press to take a photo. Long press for 1 second to start/stop Left control stick recording) Trimming Take off / Land Power button (Long press for 1 second to take off / land)
Install the remote control battery Use the screwdriver to press down the position shown in the figure, and open the battery cover to install the battery (not included). Quick Start Frequency matching 1. Turn on the drone and place it on a horizontal surface. 2.
Page 11
Take off Method 1: Long press for 1 second to take off. Method 2: 1. Push the two control sticks at same time as shown in the figure. 2. Push the left stick up slowly and the drone will take off. Landing Method 1: Press the take off / land button for one second, and the drone will land slowly.
Emergency Stop In case of emergency, press the emergency stop for one second, the motor of the drone will stop and fall. Only stop motors during the flight when emergent situation happens, so as to reduce the risk of damage or injury. Basic Flight Note: The flight example is in the case of remote control is under mode1.
Headless mode Headless mode means that when the aircraft is flying, the movement direction of the aircraft is fixed, which does not change with the orientation of the aircraft, as shown in the figure. Front Front Back Back Front Front Back Back Direction setting:...
3D Flip mode Step 1: Press the "3D Roll" button to start the roll mode, at this time the remote control keeps beeping. Step 2: Push the right stick forward, and the drone will roll forward 360° immediately. Tip: If you want to roll in other directions, push the right stick to other directions.
Specification Drone Take-off weight Fold:11.2*4.8*4.5cm Drone size Unfold:17.1*14.2*4.5cm Working frequency 2.4GHz Maximum remote control distance 100m(No interference,no shelter) Image transmission range 50m(No interference,no shelter) Maximum resolution 1920*1080 Battery 3.7V 580mAh 2.146Wh Working temperature 0-40℃ Remote control Working frequency 2.4GHz Remote control battery 3 ×...
Page 16
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 17
D15 Mini Drone Name Model Manufacturer Shenzhen Deepsea Excellence Technology Co., Ltd. 5th Floor, Building 7, Hongfa High-tech Park, Keji 4th Road, Address Shiyan Street, Baoan District, Shenzhen Battery information Lipo 580mAh 3.7V 2.146Wh Charging voltage / current FCC ID...