Table of Contents
Related Manuals for Amplicon NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q
Summary of Contents for Amplicon NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q
- Page 1 Manual PXI Express NI PXIe-1062Q User Manual NI PXIe-1062Q User Manual April 2012 371843D-01 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 2 Manual Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 3 COLLECTIVELY TERMED “SYSTEM FAILURES”). ANY APPLICATION WHERE A SYSTEM FAILURE WOULD CREATE A RISK OF HARM TO PROPERTY OR PERSONS (INCLUDING THE RISK OF BODILY INJURY AND DEATH) SHOULD NOT BE RELIANT SOLELY Amplicon.com IT and Instrumentation for industry Sales:...
- Page 4 RESPONSIBLE FOR VERIFYING AND VALIDATING THE SUITABILITY OF NATIONAL INSTRUMENTS PRODUCTS WHENEVER NATIONAL INSTRUMENTS PRODUCTS ARE INCORPORATED IN A SYSTEM OR APPLICATION, INCLUDING, WITHOUT LIMITATION, THE APPROPRIATE DESIGN, PROCESS AND SAFETY LEVEL OF SUCH SYSTEM OR APPLICATION. Amplicon.com IT and Instrumentation for industry Sales:...
-
Page 5: Table Of Contents
Setting Fan Speed ....................2-5 Installing Filler Panels..................2-5 Installing Slot Blockers ...................2-5 Rack Mounting ......................2-5 Connecting Safety Ground.....................2-6 Connecting to Power Source..................2-6 Installing a PXI Express System Controller ..............2-7 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email:... - Page 6 Connecting Safety Ground................3-4 Connecting to Power Source................3-4 Appendix A Specifications Appendix B Pinouts Appendix C Technical Support and Professional Services Glossary Index Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
-
Page 7: About This Manual
This font is also used for the proper names of disk drives, paths, directories, programs, subprograms, subroutines, device names, functions, operations, variables, filenames, and extensions. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... -
Page 8: Related Documentation
PCI Industrial Computers Manufacturers Group • PCI Express Base Specification, Revision 1.1, PCI Special Interest Group • PXI-5 PXI Express Hardware Specification, Revision 2.0, PXI Systems Alliance Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email:... -
Page 9: Getting Started
NI PXIe-1062Q User Manual ❑ Software media with PXI Platform Services 2.0 or higher ❑ Read Me First: Safety and Electromagnetic Compatibility ❑ Chassis number labels Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email:... -
Page 10: Key Features
• Low-jitter internal 100 MHz reference clock for PXI Express slots with ± 25 ppm stability • Quiet operation for 0 to 30 °C at 43.6 dBA Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... - Page 11 Front and rear rack-mount kits • Replacement power supply shuttle • EMC filler panels • Slot blockers for improved cooling performance • Factory installation services Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
-
Page 12: Chassis Description
10 PXI Express System Timing Slot 5 Chassis Model Name 11 PXI Peripheral Slot 6 Backplane Connectors 12 PXI Filler Panels Figure 1-1. Front View of the NI PXIe-1062Q Chassis Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com... - Page 13 13 Power Supply Shuttle Handle (2x) 7 Remote Inhibit and Voltage Monitoring Connector 14 Power Supply Shuttle Mounting Screws (8x) Figure 1-2. Rear View of the NI PXIe-1062Q Chassis Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com...
-
Page 14: Optional Equipment
• CompactPCI Express compatible 4-Link system controller products • CompactPCI Express compatible Type-2 peripheral products • PXI peripheral products • Standard CompactPCI peripheral products Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com... -
Page 15: System Controller Slot
The hybrid peripheral slots provide full PXI Express functionality and 32-bit PXI functionality except for PXI Local Bus. The hybrid peripheral slot only connects to PXI Local Bus 6 left and right. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... -
Page 16: Pxi Peripheral Slots
The system timing slot has a pin (PXIe_SYNC_CTRL) through which a system timing module can control the PXIe_SYNC100 timing. Refer to the PXI Express Specification and the PXIe_SYNC_CTRL section of this chapter for details. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com... -
Page 17: Pxi Local Bus
8 are not routed anywhere. Local bus signals may range from high-speed TTL signals to analog signals as high as 42 V. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... -
Page 18: Pxi Trigger Bus
An independent buffer drives PXIe_CLK100 to the hybrid peripheral slots and system timing slot. Refer to Figure 1-5 for the routing configuration of PXIe_CLK100. These clocks are matched in skew to less than 100 ps. The Amplicon.com IT and Instrumentation for industry Sales:... - Page 19 10 MHz 10 MHz REF IN REF OUT PXI_CLK10 PXIe_CLK100 PXIe_SYNC100 PXI_CLK10_IN Figure 1-5. Distribution of PXI_CLK10, PXIe_CLK100, and PXIe_SYNC100 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 20 PXIe_CLK100 and PXIe_SYNC100). Refer to Appendix A, Specifications, for the specification information for an external clock provided on the 10 MHz REF IN connector on the rear panel of the chassis. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com...
-
Page 21: Pxie_Sync_Ctrl
PXIe_SYNC_CTRL for use when n > 1. Refer to Table B-6, Connector Pinout for the System Timing Slot, for system timing slot pinout. Refer to Appendix A, Specifications, for the PXIe_SYNC_CTRL input specifications. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... - Page 22 PXIe_SYNC100 in phase with each other. Refer to Figure 1-7 for timing details with this method. PXI_CLK10 PXIe_SYNC_CTRL PXIe_SYNC100 SYNC100 Divider Restarted Here Figure 1-7. PXIe_SYNC100 at 3.33 MHz Using PXIe_SYNC_CTRL as Restart Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
-
Page 23: Installation And Configuration
Explosive Atmosphere—Do not operate the chassis in conditions where flammable gases are present. Under such conditions, this equipment is unsafe and may ignite the gases or gas fumes. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... -
Page 24: Chassis Cooling Considerations
Figure 2-1. The vent locations for the NI PXIe-1062Q chassis are shown in Figure 2-2. Failure to provide these clearances may result in thermal-related failures in the chassis or modules. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... - Page 25 Manual Chapter 2 Installation and Configuration 1.75 [44.45] 1.75 [44.45] NI PXIe-1062Q 3.00 [76.20] Figure 2-1. NI PXIe-1062Q Cooling Clearances Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 26 Installation and Configuration 1 Primary Air Exhaust Vent 3 Primary Air Intake Vent 2 Air Filter 4 Secondary Air Intake/Exhaust Vents Figure 2-2. NI PXIe-1062Q Vents Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
-
Page 27: Chassis Ambient Temperature Definition
Components. Note You may want to remove the feet from the NI PXIe-1062Q chassis when rack mounting. To do so, remove the screws holding the feet in place. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... -
Page 28: Connecting Safety Ground
Manual position. Observe that all fans become operational and the power switch LED is a steady green. Switching the Inhibit Mode switch to the Default position allows the system controller to control the power supply. Amplicon.com IT and Instrumentation for industry Sales:... -
Page 29: Installing A Pxi Express System Controller
1 NI PXI Express System Controller 3 Injector/Ejector Handle 2 NI PXIe-1062Q Chassis 4 System Controller Front Panel Mounting Screws (4x) Figure 2-3. Installing a PXI Express System Controller Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... - Page 30 1 NI PXIe-1062Q Chassis 2 NI PXI Express System Controller 3 Injector/Ejector Rail Figure 2-4. NI PXI Express System Controller Installed in a NI PXIe-1062Q Chassis Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com...
-
Page 31: Installing Peripheral Modules
When you begin to feel resistance, push up on the injector/ejector handle to fully seat the module into the chassis frame. Secure the module front panel to the chassis using the module front-panel mounting screws. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... -
Page 32: Power Inhibit Switch Led Indicator
If the inhibit switch LED is steady green (not flashing), the chassis is powered on and operating normally. • If the inhibit switch LED is flashing green, the air-intake temperature has exceeded the chassis operating range. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... -
Page 33: Remote Voltage Monitoring And Control
Table 2-1. Remote Inhibit and Voltage Monitoring Connector Pinout DB-9 Pin Signal Logic Ground +5 VDC Reserved +3.3 VDC Inhibit (Active Low) +12 VDC Reserved –12 VDC Logic Ground Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com... - Page 34 –12 V –12.6 to –11.4 V 1, 9 Logic Ground If the voltages fall within the specified ranges, the chassis complies with the CompactPCI voltage-limit specifications. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
-
Page 35: Inhibit Mode Switch
PXI_CLK10 or routing the backplane’s PXI_CLK10 to another chassis. Refer to the System Reference Clock section of Chapter 1, Getting Started, for details about these signals. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email:... -
Page 36: Pxi Express System Configuration With Max
PXI triggers, refer to KnowledgeBase 3TJDOND8 at ni.com/support The configuration steps for single or multiple-chassis systems are the same. Figure 2-6. Multichassis Configuration in MAX Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... -
Page 37: Pxi-1 System Configuration
Device drivers and other utility software read the pxiesys.ini file to obtain system information. For detailed information pxisys.ini about initialization files, refer to the PXI specification at www.pxisa.org Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com... -
Page 38: Using System Configuration And Initialization Files
The device drivers should have no need to directly read the file. For detailed information regarding chassis.ini initialization files, refer to the PXI Express specification at www.pxisa.org Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com... -
Page 39: Maintenance
Refer to your module user documentation for information on cleaning the individual CompactPCI or PXI Express modules. Caution Always disconnect the AC power cable before cleaning or servicing the chassis. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... -
Page 40: Interior Cleaning
Complete the following steps to reset the circuit breaker. Turn off the chassis. Disconnect the AC power cable. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... -
Page 41: Replacing The Modular Power Supply
Disconnect the power cable from the power supply shuttle on the back of the chassis. Identify the eight mounting screws for the NI PXIe-1062Q that Amplicon.com IT and Instrumentation for industry Sales:... -
Page 42: Installation
Connecting Safety Ground section of Chapter 2, Installation Configuration. Connecting to Power Source Refer to the Connecting to Power Source section of Chapter 2, Installation Configuration. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com... -
Page 43: Appendix A Specifications
Over-current protection......10 A circuit breaker Line regulation 3.3 V..........<±0.2% 5 V........... <±0.1% ±12 V ..........<±0.1% Efficiency ..........70% typical The operating range is guaranteed by design. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email:... - Page 44 — — Hybrid Peripheral Slot with — PXI-1 Peripheral Hybrid Peripheral Slot with — — — PXI-5 Peripheral PXI-1 Peripheral Slot 11 A — Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 45 Over-voltage protection 3.3 V and 5 V ........Clamped at 20 to 30% above nominal output voltage Power supply shuttle MTTR ....Replacement in under 5 minutes Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com...
- Page 46 MIL-PRF-28800F Class 3 low temperature limit and MIL-PRF-28800F Class 2 high temperature limit.) Relative humidity range......10 to 90%, noncondensing (Tested in accordance with IEC-60068-2-56.) Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 47 Auto fan (up to ~30 °C ambient) ... 43.6 dBA High fan..........62 dBA Sound Power Auto fan (up to ~30 °C ambient) ... 52.8 dBA High fan..........72 dBA Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com...
- Page 48 To obtain product certifications and the DoC for this product, visit , search by model ni.com/certification number or product line, and click the appropriate link in the Certification column. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 49 3U modules. Backplane bare-board material ....UL 94 V-0 Recognized Backplane connectors ......Conforms to IEC 917 and IEC 1076-4-101, and are UL 94 V-0 rated Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 50 (When terminated with a 50 Ω load to 1.30 V or Thévenin equivalent)..400–1000 mV Single-ended V ........2.0–2.5 V Note For other specifications, refer to the PXI-5 PXI Express Hardware Specification. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 51 (10 Hz–1 MHz range) PXIe_SYNC_CTRL ............3.0–5.5 V ............0–0.8 V PXI Star Trigger Maximum slot-to-slot skew ....250 ps Backplane characteristic impedance ..65 Ω ±10% Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email:...
- Page 52 0.583 in. (14.8 mm) in rear. Weight ............8.8 kg (19.4 lb) Chassis materials ........Sheet Aluminum (5052-H32, 3003-H14, and 6061-T6), Extruded Aluminum (6060-T6), and Cold Rolled Steel, PC-ABS, Santoprene, Nylon Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email:...
- Page 53 Notice that the front and rear chassis mounting holes (size M4) are symmetrical. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com...
- Page 54 1.823 [46.30] 3.542 Front of [89.97] PXI Card 1.844 [46.84] 2.13 0.30 [7.25] [54.2] 15.61 [396.5] Figure A-1. NI PXIe-1062Q Chassis Dimensions (Front and Side) Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 55 Manual Appendix A Specifications 1.01 12.700 [322.58] [25.7] 1.02 [25.8] 8.650 [219.7] Figure A-2. NI PXIe-1062Q Chassis Dimensions (Bottom) Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 56 3 Optional Rear Rack Mount Kit Figure A-3. NI Chassis Rack Mount Kit Components Note The chassis shown in Figure A-3 is representative of the NI PXI-1042/NI PXIe-1062Q product line. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com...
-
Page 57: Appendix B Pinouts
Peripheral slots. For more detailed information, refer to the PXI-5 PXI Express Hardware Specification, Revision 2.0. Contact the PXI Systems Alliance for a copy of the specification. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com... - Page 58 3PETp2 3PETn2 3PETp3 3PETn3 3PERp3 3PERn3 3PERp2 3PERn2 4PETp0 4PETn0 4PERp0 4PERn0 4PETp1 4PETn1 4PETp2 4PETn2 4PERp2 4PERn2 4PERp1 4PERn1 4PETp3 4PETn3 4PERp3 4PERn3 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 59 Table B-4. XP4 Connector Pinout for the System Controller Slot 5Vaux SYSEN# WAKE# ALERT# PXI_TRIG3 PXI_TRIG4 PXI_TRIG5 PXI_TRIG6 PXI_TRIG2 PXI_STAR PXI_CLK10 PXI_TRIG1 PXI_TRIG0 PXI_TRIG7 PXI_LBR6 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 60 1PERp2 1PERn2 1PERp1 1PERn1 1PETp3 1PETn3 1PERp3 1PERn3 1PETp4 1PETn4 1PETp5 1PETn5 1PERp5 1PERn5 1PERp4 1PERn4 1PETp6 1PETn6 1PERp6 1PERn6 1PETp7 1PETn7 1PERp7 1PERn7 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 61 Table B-7. XP4 Connector Pinout for the System Timing Slot 5Vaux SYSEN# WAKE# ALERT# 3.3V 3.3V 3.3V PXI_TRIG3 PXI_TRIG4 PXI_TRIG5 PXI_TRIG6 PXI_TRIG2 ATNLED PXI_CLK10_IN PXI_CLK10 PXI_TRIG1 PXI_TRIG0 ATNSW# PXI_TRIG7 PXIe_SYNC_CTRL PXI_LBL6 PXI_LBR6 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 62 AD[24] AD[30] AD[29] AD[28] AD[27] REQ# 3.3V AD[31] BRSVP1A5 BRSVP1B5 RST# GNT# IPMB_PWR HEALTHY V(I/O) INTP INTS INTA# INTB# INTC# INTD# –12V TRST# +12V Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 63 PXI_TRIG0 PXI_TRIG7 PXI_BRSVA15 PXI_LBL6 PXI_LBR6 V(I/O) V(I/O) V(I/O) V(I/O) V(I/O) V(I/O) 64EN# PXI_LBR7 PXI_LBR8 PXI_LBR9 PXI_LBR10 PXI_LBR11 PXI_LBR12 PXI_LBL7 PXI_LBL8 PXI_LBL9 PXI_LBL10 PXI_LBL11 PXI_LBL12 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 64 AD[24] AD[30] AD[29] AD[28] AD[27] REQ# 3.3V AD[31] BRSVP1A5 BRSVP1B5 RST# GNT# IPMB_PWR HEALTHY# V(I/O) INTP INTS INTA# INTB# INTC# INTD# –12V TRST# +12V Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 65 Table B-12. XP4 Connector Pinout for the Hybrid Slot 5Vaux SYSEN# WAKE# ALERT# 3.3V 3.3V 3.3V PXI_TRIG3 PXI_TRIG4 PXI_TRIG5 PXI_TRIG6 PXI_TRIG2 ATNLED PXI_STAR PXI_CLK10 PXI_TRIG1 PXI_TRIG0 ATNSW# PXI_TRIG7 PXI_LBL6 PXI_LBR6 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 66 • Training and Certification—Visit for training ni.com/training and certification program information. You can also register for instructor-led, hands-on courses at locations around the world. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email:...
- Page 67 You also can visit the Worldwide Offices section of ni.com/niglobal to access the branch office Web sites, which provide up-to-date contact information, support phone numbers, email addresses, and current events. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com...
- Page 68 Equal or greater than. ≤ Equal or less than. Percent. Amperes. Alternating current. ANSI American National Standards Institute. Auto Automatic fan speed control. American Wire Gauge. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 69 DB-9 A 9-pin D-SUB connector. Direct current. Declaration of Conformity. D-SUB Subminiature D connector. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 70 Hertz; cycles per second. International Electrotechnical Commission; an organization that sets international electrical and electronics standards. IEEE Institute of Electrical and Electronics Engineers. Mainframe peak current. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 71 Meters. Megahertz. One million Hertz; one Hertz equals one cycle per second. Miles. Milliseconds. MTBF Mean time between failure. MTTR Mean time to repair. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 72 Installing such a device into any other slot can damage the device, the PXI backplane, or both. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com...
- Page 73 This slot is located at slot 4 and has dedicated trigger lines to other slots. Transistor-transistor logic. Underwriter’s Laboratories. Volts. Volts alternating current. Peak-to-peak voltage. Watts. Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email:...
- Page 74 (figure), 2-4 examples (NI resources), C-1 cleaning fan filters, 3-1 external clock source specifications, A-9 clearances for chassis cooling, 2-2 figure, 2-3 CLK10 rear connectors, 2-13 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email:...
- Page 75 (caution), 3-1 PXI Express configuration in MAX, 2-14 PXI Express system controller installed in a NI PXIe-1062Q chassis (figure), 2-8 PXI-1 configuration in MAX, 2-15 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com...
- Page 76 PXI star, routing, 1-9 optional equipment, 1-6 PXI-1 configuration in MAX, 2-15 PXIe_DSTAR, routing, 1-9 PXIe_SYNC_CTRL, 1-13 specifications, A-9 using as restart (figure), 1-14 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 77 (NI resources), C-1 AC input, A-1 trigger bus, 1-10 DC output, A-2 troubleshooting (NI resources), C-1 electromagnetic compatibility, A-6 environmental operating environment, A-4 storage environment, A-5 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
- Page 78 Index unpacking the NI PXIe-1062Q chassis, 1-1 Web resources, C-1 voltage monitoring connector. See DB-9 connector voltages at voltage monitoring connector (DB-9) (table), 2-12 Amplicon.com IT and Instrumentation for industry Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com...
Need help?
Do you have a question about the NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q and is the answer not in the manual?
Questions and answers