Advertisement
Quick Links
Advertisement
Related Manuals for ZANE ARTS BG-005
Summary of Contents for ZANE ARTS BG-005
- Page 1 B G - 0 0 5 / G R A R T S T A K E R A C K M A N U A L - V e r 1 . 0 1...
- Page 2 Please be sure to read the manual before using this product. If you have any questions or if there is a problem with the product, please contact the store where you purchased the product or ZANE ARTS directly. ■ PARTS Thick Pad...
- Page 3 ■ ABOUT THIS PRODUCT Please familiarize yourself with this product before using. May be deformed when dropped. If dropped when full and heavy, the metal frame may become disfigured. Please use extra care when unloading from a vehicle.
- Page 4 ■ HANDLING PRECAUTIONS Please be sure to follow the instructions below to avoid the risk of injury to one’s self and bystanders, as well as damage to property. UNDER THE FOLLOWING CONDITIONS, RISK OF MINOR INJURY AND DAMAGE TO PROPERTY MAY OCCUR. DANGER ● ...
- Page 5 ● Very heavy when loaded with pegs. Please be very careful not to drop on feet and cause injury. Also, if dropped on the ground the metal frame may become disfigured or even break. ● Please be aware that the metal feet may scratch or damage flooring when stored.
- Page 6 ● After each use, wipe off any moisture and dry thoroughly before storing. If stored wet or dirty the product may become smelly or moldy and may be damaged by corrosion. ● Store out of reach of infants and children. ● ...
- Page 7 ■ USE 1 HANGING PEGS ON THE RACK A: Hang the pegs on the bars. B: Hang all pegs facing the same direction, aligning the holes. ※ Use matching pegs from the same manufacturer. Hang facing the same direction.
- Page 8 1 HANGING PEGS ON THE RACK Store the pegs with space at the end of each row. Pegs stored too tightly will be difficult to remove. 【 Number of pegs that can be stored on each bar 】 ● Grart Stake 28: 16 pegs ● ...
- Page 9 REMOVING THE STAKES A: Insert the Stake Hook through the peg holes. B: Lift the stakes from the rack. Lift the stakes from the rack. Insert the Stake Hook through the peg holes.
- Page 10 STORING THE STAKE HOOK AND A HAMMER IN THE POCKET A: Store the Stake Hook and a hammer in the pocket. The Stake Hook fits inside the loop inside the pocket. B: Adjustable pocket (two sizes) Adjust to fit hammer. Hammer of choice Adjustable...
- Page 11 USE PADS BASED ON THE SIZE OF PEGS BEING STORED. Use the thick pad when using ZANE ARTS Grart Stakes. When using other brands refer to diagram A. Change to the thin pad if area A is more than 25 mm.
- Page 12 LAY FLAT FOR TRANSPORT When transporting by vehicle, always lay on its side. (Laying the rack flat helps reduce the noise of the pegs vibrating during transport, and also keeps the pegs from falling out.) Be careful not to drop when using.
- Page 13 INCOMPATIBLE PEGS The following pegs are not compatible. Pegs that do not have a hole or with a hole smaller than 7 mm. Pegs with more than 40 mm above the hook. Pegs without a hook. Hook opening less than 5 mm wide.
- Page 14 ■ WARRANTY AND REPAIR If you find any defects in the product, please contact the store where you purchased it or us directly. We will replace or repair any item found to have a manufacturing defect free of charge. We will repair products with damage caused by wear and aging at a reasonable price.
Need help?
Do you have a question about the BG-005 and is the answer not in the manual?
Questions and answers