Summary of Contents for SLOC 200-1
- Page 1 SLOC GmbH Waltendorfer Gürtel 2 8010 Graz – Austria +43 316 395 396 BATTERY REPLACEMENT Version 1.0 03.03.2021 www.sloc.one...
-
Page 2: Table Of Contents
Tools / Materials ....................... 4 The battery replacement ..................5 Support ........................8 Legal requirements ....................8 5.1. Declaration of conformity ..................8 Copyright ......................... 9 6.1. Waste disposal ......................9 © SLOC GmbH 2021 www.sloc.one Seite 2 von 10... -
Page 3: Introduction
In this documentation you will learn how to replace the batteries of your product quickly and easily. We at SLOC always try to make our products as easy and intuitive as possible. However, if you encounter any problems, please do not hesitate to contact us. -
Page 4: General
All products of the series 100 Description Images All products of the series 200 2.2. Tools / Materials Description Images Torx T10x75mm (Screwdriver) batteries (2 pieces) SILICONE ACID FREE (Manufacturer independent) © SLOC GmbH 2021 www.sloc.one Seite 4 von 10... -
Page 5: The Battery Replacement
Battery replacement 3. The battery replacement 1. Turn the device 180 degrees: Make sure that the bottom of the SLOC or the screws are now facing you. → Take the screwdriver TORX 10x75mm 2. Unscrew the screws: Now unscrew the fastening screws (4 pcs.) counterclockwise. - Page 6 → Small LED lamp on the PCB is lighting up 7. Mount the antenna: Now carefully mount the antenna on the device again (if this was previously dismounted). → Put the lid back over the PCB © SLOC GmbH 2021 www.sloc.one Seite 6 von 10...
- Page 7 Battery replacement 8. Rotate device 180 degrees: On the bottom of the SLOC, using the screws you removed earlier, reattach the PCB with the cover. → Check whether the rubber seal (screws) is still in place. 9. Siliconizing: If the components (PCB/cover) are fixed with the screws incl.
-
Page 8: Support
5. Legal requirements 5.1. Declaration of conformity Any changes or modifications not expressly approved by SLOC could void the user's authority to operate this equipment. No serviceable parts are included. EC – Konformitätserklärung / EC – Declaration of Conformity SLOC GmbH Waltendorfer Gürtel 2, 8010 Graz, Austria, +43 316 395 396, office@sloc.one... -
Page 9: Copyright
Rights - including those of translation, reprint, broadcast, photomechanical or similar reproduction and storage or processing in computer systems, in whole or in part - are reserved. No reproduction may occur without the express written consent from SLOC GmbH. 6.1. Waste disposal This symbol on the product, batteries or packaging means that this product and any batteries it contains must not be disposed of with your other household waste. - Page 10 Battery replacement SLOC GmbH Waltendorfer Gürtel 2 8010 Graz Österreich / Austria +43 316 395 396 support@sloc.one © SLOC GmbH 2021 www.sloc.one Seite 10 von 10...
Need help?
Do you have a question about the 200-1 and is the answer not in the manual?
Questions and answers