Part 1 Open Package
1.When opening the lid on both ends of the Roll-Up Projection Screen, it is best to
use tools such as scissors; please do not use your own hand to open, please
protect your own hands;
2.Take out the instructions, Velcro
3.Slide the projection screen out of the reel box; do not force it to the ground
4.Remove the adhesive tape at the edge of the roll-up projection screen; please
gently tear it open;
5.From the end of the projection screen, gently and slowly, expand it and then use
the reel box to press the projector screen in the horizontal direction. This action will
help to lose its inertia and make it more better .
Part 2 Size Description
There are 5 sizes for this projection screen, please make sure that the size in your
hand is the same as the size you purchased;
Note:this projection screen is purely hand-made, and there may be an error in
length and width, but it will not affect your use;
Size(in)
50
60
72
82
100
Part 3 Metal Eyelet and Black Border of Projector Screen
Note:The number of metal eyelets and the width of the border of the projection
screen of each size are not the same. Please make sure that the number of metal
eyelet and the width of the border of your projection screen are the same as your
size.
Size
50
60
72
82
100
Roll-Up Projection Screen Instructions
Length(cm) /(in)
110/3.60
133/4.36
160/5.24
184/6.03
220/7.21
Metal Eyelet(qty)
4
4
6
6
6
Width(cm) /(in)
62/2.03
74/2.42
90/2.95
105/3.44
126/4.13
Border Width(cm/in)
2(0.78)
2(0.78)
3(1.18)
3(1.18)
3(1.18)