Page 1
14" 4000PSI ROTARY SURFACE CLEANER CT5777 USER MANUAL Read the operating manual thoroughly before work and keep it for future reference. Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Page 3
INTRODUCTION Attention: Read through the complete manual prior to the initial use of your machine. Using the Operator’s manual The operating manual is an important part of your rotary surface cleaner. It should be read thoroughly before initial use and referred to often to make sure adequate safety and service concerns are being addressed.
Page 4
The surface Cleaning System you have purchased connects directly to a 1/4” quick connect coupler, operating to a maximum of 4000 PSI. This 14” rotary surface cleaner is designed to operate with cold water pressure washers. We do not recommend the use of hot water as the nylon brush skirt will soften and wear prematurely.
up to 4 GPM at 4000 PSI. This unit will not spin efficiently with pressure under 2.3 GPM. Periodically check the tips to ensure they are not plugged by dirt particles. It is very important when operating your 14” rotary surface cleaner, that you maintain a continuous motion.