Auto Operation Mode - LG AVNQ50GM2A5 Owner's Manual

Auto Operation Mode

NOTE
!
D D uring Auto Operation Mode
- If the system is not operating as desired, manually switch to another mode. The system will not
automatically switch from the cooling mode to the heating mode, or from heating to cooling, then
you must set the mode and the desired temperature again.
1
Press the ON/OFF button.
The unit will respond with beep sound.
2
Press MODE button to select Auto Operation
Mode.
3
Set the desired temperature.
< < For Cooling Model>
The temperature and fan speed are automatically set by the
electronic controls based on the actual room temperature.
If you feel hot or cold, press TEMPERATURE SETTING buttons
for more cooling or heating effect.
You cannot switch the indoor fan speed. It has already been
set by the Auto Operation Mode rule.
To raise the temperature
To lower the temperature
<For Heating Model>
OWNER'S INSTRUCTION
* Please select the code
depend on your feeling.
Code
You can set desired temperature and
indoor fan speed.
Setting Temp. Range :
18~30 °C(64~86 °F)
15
Feel
2 Cold
1 Slightly cool
0 Neutral
-1 Slightly warm
-2 Warm