Advertisement
2. SPECIFICATIONS
Electric fan heater for industrial applications. Selectable heat settings with thermostat control, plus fan only. A totally dry heat with no
condensation, no gas, no fumes, so no smell. Ideal for workshops, garages etc. Supplied with power cable and 3-pin approved plug.
Voltage/Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V ~ 50Hz
Max Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000W
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1500/3000W
IMPORTANT! This unit is designed to raise the ambient temperature of an entire room, the temperature of the air coming out of the front of the
heater will be warmer than the general temperature of the room but there may not be significant increase due to the large volume of air passing
over the element. For the same reason, the element is hot during operation but does not visibly glow. The room temperature depends on room size,
insulation and the ambient temperature, which will increase as the room gets warmer.
3. OPERATION
3.1
Position heater in an upright position on a firm surface and at a safe distance from any obstructions, flammable substances etc,
see Fig 1.
3.2
Connect the heater to a suitable mains supply.
3.3
Set the thermostat dial to the maximum setting (fully clockwise).
3.4
The fan heater will switch on when the power setting selector is set to one of the three power settings (Fig 2).
NOTE: It will take up to three minutes for the heater to reach optimum temperature.
3.5
Once the room reaches the required temperature, turn the thermostat dial slowly counter-clockwise until you hear the thermostat click,
this will maintain the room temperature at this setting. The fan will continue to operate until the power switch is turned to the OFF
position.
3.6
For fan-only operation select first power setting but set thermostat to minimum.
4. MAINTENANCE
WARNING! Before attempting any maintenance ensure the unit is unplugged from the mains power supply and that it is cool.
4.1. Clean the heater with a soft dry cloth. DO NOT use abrasives or solvents.
4.2. Periodically check the heater grille to ensure it is not blocked.
no other maintenance is necessary. If you experience a problem with your heater or if the power lead or plug is damaged contact your local
authorised service agent for repair. DO NOT dismantle or tamper with the heater as this may be dangerous and will invalidate your warranty.
NOTE: It will take up to three minutes for the heater elements to reach optimum temperature. This is normal and not a fault.
5. DECLATION OF CONFORMITY
Declaration of Conformity
INDUSTRIAL FAN HEATER 3kW
Model: EH3000
2006/95/EC Low Voltage Directive
2004/108/EC EMC Directive
93/68 EEC CE Marking Directive
2002/95/EC roHS Directive
2002/96/EC WEEE Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
. . .
Fig 1
We, the sole importer into the UK, declare that the product listed below is in conformity with the following standards and directives.
The construction file for this product is held by the Manufacturer and may be inspected, by a national authority, upon
request to Jack Sealey Ltd.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13A
Dimensions (W x D x H). . . . . . . . . . . . . . . . . . . 280 x 400 x 300mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.6kg
1st power setting (fan only)
Fig 2
OFF
Power Switch
4th February 2008
01284 757500
01284 703534
2nd power setting (1 bar 1500W)
3rd power setting (2 bar 3000W)
Thermostat
www.sealey.co.uk
W e b
sales@sealey.co.uk
email
EH3300 - 2 - 040207
Advertisement
