Advertisement
Quick Links
Explosion Proof 20-Amp Ground Fault Circuit Interrupter
Thank you for your purchase of the Larson Electronics EXP-GFCI-20A.
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
•
RELEVANT LOCAL BUILDING CODES.
RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF LUMINAIRES ELECTRICAL
•
SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE RATED LUMINAIRE FIXTURES VOLTAGE.
•
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
WARNING
TO AVOID THE RISK OF FIRE, EXPLOSION OR ELECTRIC SHOCK, THIS PRODUCT SHOULD BE INSTALLED,
INSPECTED AND MAINTAINED BY A QUALIFIED ELECTRICIAN ONLY, IN ACCORDANCE WITH ALL
APPLICABLE ELECTRICAL CODES.
TO AVOID ELECTRIC SHOCK:
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
PRODUCT MUST BE CONNECTED TO A WIRING SYSTEM WITH AN EQUIPMENT-GROUNDING
CONDUCTOR.
TO AVOID EXPLOSION:
•
MAKE SURE THE SUPPLY VOLTAGE IS WITHIN THE VOLTAGE RATING.
•
ENSURE THE MARKED T RATING IS LESS THAN THE IGNITION TEMPERATURE OF THE HAZARDOUS
ATMOSPHERE.
•
DO NOT OPERATE IN AMBIENT TEMPERATURES ABOVE THOSE INDICATED ON THE PRODUCT
NAMEPLATE.
•
DO NOT OPERATE IF THE LENS, CORD, SEALS, HOUSING, RECEPTACLES, ETC. IS CRACKED OR
DAMAGED. IF SO, DISCONTINUE USE AND CONTACT MANUFACTURER FOR REPLACEMENT PARTS.
•
ALL FASTENERS SHOULD BE PROPERLY SEATED.
The EXP-GFCI-20A from Larson Electronics is an explosion proof 20-amp ground fault circuit interrupter (GFCI) that provides
protection for electrically operated devices. This explosion proof GFCI is rated for Class I Divisions 1 & 2 Groups B, C and D, Class II
Divisions 1 & 2 Groups E, F and G and Class III hazardous areas. The EXP-GFCI-20A is ideal for use in environments with corrosive
atmospheres, wet locations and in areas that contain potentially explosive gases, dusts or other hazardous materials.
Larson Electronics, LLC
20-Amp GFCI - Malleable Iron Body
Instruction Manual
Phone: (800) 369-6671
Fax: (903) 498-3364
EXP-GFCI-20A
www.larsonelectronics.com
1 of 3
Advertisement
Related Manuals for Larson Electronics EXP-GFCI-20A
Summary of Contents for Larson Electronics EXP-GFCI-20A
- Page 1 This explosion proof GFCI is rated for Class I Divisions 1 & 2 Groups B, C and D, Class II Divisions 1 & 2 Groups E, F and G and Class III hazardous areas. The EXP-GFCI-20A is ideal for use in environments with corrosive atmospheres, wet locations and in areas that contain potentially explosive gases, dusts or other hazardous materials.
- Page 2 (cord set) must be inspected for wear before each use. For replacement, contact manufacturer. If the pilot light does not light with circuit breaker in the "ON" position, check the following conditions: Larson Electronics, LLC 2 of 3 Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...
- Page 3 Inspect for good working condition prior to storage and before re-use. REPLACEMENT PARTS The EXP-GFCI-20A is designed to provide years of reliable performance. Should the need for replacement parts arise, please contact Larson Electronics. THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.