NORDIC PRODUCT SPECIFICATION Voltage: Gauges: Digital Readout (PSI) Max Pressure: 160psi Flow Rate: 12L/min for inflator Inflator Hose Length: 500mm GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury.
Page 3
NORDIC 2.3 PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.
Page 4
NORDIC 2.5 SERVICE Your power tool should be serviced by a qualified specialist using only standard spare parts. This will ensure that it meets the required safety standards. 2.6 AIR PUMP SAFETY WARNINGS • Inspect the Air Pump before use and do not use if any of the components are broken, burnt, melted, wet or damaged •...
NORDIC ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS Use only batteries and chargers applicable for this machine. 4.1 BATTERIES • Never attempt to open for any reason. • Do not store in locations where the temperature may exceed 40 °C.
Page 6
NORDIC SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Read manual before use Wear eye protection Wear ear protection Wear safety gloves Wear respiratory protection In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated;...
NORDIC 6. PRODUCT ACCESSORIES 1. Schrader inflator 2. Sport ball Needle 3. Inflatable attachment 4. Schrader to Presta convertor 5. Battery (not included) 6. Charger (not included) 7. BEFORE YOU START UNPACKING This product has been shipped completely assembled. •...
Page 8
NORDIC NOTE: After preset pressure has been set, pressure setting stays in the gauge memory for 180 seconds. To recall the previous pressure setting for up to 180 seconds after inflation, Press the + or - button. To reset pressure, press and hold the mode button.
NORDIC 9. CLEANING AND MAINTENANCE Always disconnect the plug from the socket before carrying out any cleaning work. 9.1 CLEANING • Keep all air gaps and engine housing clean as far as possible. • Wipe the device with a clean cloth or blow it with compressed air.
Need help?
Do you have a question about the AP-L0218 and is the answer not in the manual?
Questions and answers